|
|
|
|
|
#1
06-26-2007, 09:03 AM
|
|||
|
|||
1995 300D injector tool
Good Morning, Anybody know what tool is needed to R & R the fuel injectors
on this 1995 300D? Anything particularly difficult about this process. I've got one cylinder not firing, the injector is not putting fuel thru. Thanks Al
__________________
2007 Mini Cooper 4K miles 1993 300E 2.8 120K miles 1961 Morris Minor 42K miles 1965 Morris Minor 23K miles 1997 Ford F150 235K miles 1987 Ramcharger 202K miles 1984 Chevy C-30 farm truck 88Kmiles 1968 XKE 59K miles 2001 Harley Softtail 2003 Harley Roadking 
|
|
#2
06-26-2007, 12:27 PM
|
|||
|
|||
|
There are two special splined sockets you can find on the Special Tools tab above used to remove the injectors and the delivery valves.
If the problem is the injector you can have it tested, cleaned and balanced; a new nozzle installed; or replaced with a new one. If the problem is at the IP delivery valve you should have the IP bench tested. The valve itself should only be fiddled with professionally. If its missing at start it could be the GP is out.....
__________________
Terry Allison N. Calif. & Boca Chica, Panama 09' E320 Bluetec 77k (USA) 09' Hyundai Santa Fe Diesel 48k (S.A.)
|
|
#3
06-26-2007, 02:23 PM
|
|||
|
|||
|
Thanks, now I'm going in the right direction
Al
__________________
2007 Mini Cooper 4K miles 1993 300E 2.8 120K miles 1961 Morris Minor 42K miles 1965 Morris Minor 23K miles 1997 Ford F150 235K miles 1987 Ramcharger 202K miles 1984 Chevy C-30 farm truck 88Kmiles 1968 XKE 59K miles 2001 Harley Softtail 2003 Harley Roadking
|
 |
| Bookmarks |
|
|
Linear Mode
