|
|
|
|
|
#1
09-29-2007, 01:03 PM
|
||||
|
||||
Combo switch ?!?!
Tell me if I'm wrong here,but do I not have to remove the steering wheel on a 126,1983 to replace a combo switch?
|
|
#2
09-29-2007, 01:59 PM
|
|||
|
|||
|
You must remove the steering wheel to replace that combo switch. It's not all that bad to do.........just make sure that you DO NOT use the steering lock for counter torque.
|
|
#3
09-29-2007, 07:02 PM
|
||||
|
||||
|
On a 126, yes.
__________________
83 SD 84 CD
|
|
#4
09-29-2007, 07:09 PM
|
||||
|
||||
|
Use a piece of wood I used a 2x4 cut to length with some old carpeting on the ends to put up against the wheel spokes. That way you can bear down on the nut without breaking the wheel lock.
__________________
"I have no convictions ... I blow with the wind, and the prevailing wind happens to be from Vichy" Current Monika '74 450 SL BrownHilda '79 280SL FoxyCleopatra '99 Chevy Suburban Scarlett 2014 Jeep Cherokee Krystal 2004 Volvo S60 Gone '74 Jeep CJ5 '97 Jeep ZJ Laredo Rudolf ‘86 300SDL Bruno '81 300SD Fritzi '84 BMW '92 Subaru '96 Impala SS '71 Buick GS conv '67 GTO conv '63 Corvair conv '57 Nomad 
|
 |
| Bookmarks |
|
|
Linear Mode
