I finally got the injectors balanced and cleaned, but I questioned the cleaning when I picked them up. I run WVO and they were covered with it and the tips of the injectors still had black carbon build up around the nozzle tips,not on the tips but on the injectors that the heat sheilds did not catch. Anyway, I put them in with new sheilds and the car did not seem to have as much power. I drove it for three days and the third day, coming home at highway speed, 75, I see that the car is at 100c. After I exited and drove at 55 to 45 mph it did not come down. I also have a diesel knock now when the car is cold.
I also should add that I did a valve adjustment at the time I put in the new injectors. I know that I adjusted them a little loose. I have not adjusted the pump, but I may play with that next.
Any ideas here as to the high temp.?

__________________
1985 300D burning WVO using 26 FPHE, half gallon heated fuel filter,glow plug heater,home made injection line heaters. Home made cold air induction. ALDA full out.
2003 F350 7.3(the last of the great motors)
1987 Paint Horse-non running too, just walks!