Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 11-03-2007, 03:13 PM
Bens lover's Avatar
Benz Whisperer
 
Join Date: Mar 2006
Location: Surfers Paradise,Australia.WHERE THE SHARKS COME OUT TO PLAY! And Vancouver Canada where it rains everyday!
Posts: 650
Question Mono valve on a 126 Voltage reading?

What is the normal voltage I should read on a 1983 126 female connection of the Mono Valve.
This is the reading I'm getting.
On one side I get 0.03 volts,and the other is 12.07 volts this is with the engine running for about 5 minutes.
Is this right?
Because this is the issue I have.When the engine is cold and I start the car it will take a little while before i get heat.After the engine has warmed up and I start driving,then i get cold air.So what i have tried doing is while I drive I turn the temperature knob to its coldest point,and the a/c switches on with cold air.Then i turn the knob to the warmest setting and I get luck warm air at best.I have to come to a dead stop with the car,engine still running and then I repeat the procedure again,this time the air gets very warm short of hot.
Just a few moments ago I went to dismantle the front dash to have access to the back of the heater control and to check the pods that are there.They both seem to work fine.The bottom door opens to let heat at your feet and all,so now I'm a bit confused???
__________________
Cheers
Big Dan MEng

Visit my Blog..
http://allformercedesbenz.blogspot.com/

www.benzguy.piczo.com



If at first you don't succeed,
Skydiving is not for you.

ARTIFICIAL INTELLIGENCE IS NO
MATCH FOR NATURAL STUPIDITY.

If anything can go wrong,fix it!
The hell with Murphy!!

I never think of the future.It comes soon enough.

Last edited by Bens lover; 11-03-2007 at 03:28 PM.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 12:20 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page