|
|
|
|
|
|
|
|
#1
|
||||
|
||||
|
ATF change
Tranny Dipstick should already be in the dipstick tube (?).
Ams synthetic will be fine (cross check compatibility on package) 'Be careful about cleanliness when you r+r the pan to replace the filter. No DIRT anywhere. EDIT: It will not offend the tranny if you run it through an under car wash before the surgery. I'm such a nutcase I'll spray the underside of the tranny area with a degreaser; brush and rinse (and then inspect) before the work! 'Observe correct torque on the pan bolts upon re-installation. (hint: finger tight...then cross torque...working outward from the center.) Use a new washer (if called for) when re-installing the Torque converter drain bolt.(again correct torque applied) 'New washer on the pan drain bolt (if called for) [torque] "Dex" is just a description of a certain type of ATF's specifications. When you refill do so on flat/level ground (makes checking fluid level easier). Last edited by compress ignite; 11-30-2007 at 11:25 PM. |
|
#2
|
||||
|
||||
|
Quote:
..
__________________
'87 924S '81 280SEL Sold -> 81 300SD - 93 300E w/ 3.2 85 300D- 79 300SD 82 300CD 83 300CD - CA 87 190E 5 spd 87 Porsche 924S "..I'll take a simple "C" to "G" and feel brand new about it..." |
![]() |
| Bookmarks |
|
|