Quote:
Originally Posted by t walgamuth
It looks like you have the tranny sitting toward the driver from center. On my cd we drilled two new holes so it would stay centered. If this is correct it should be pretty easy to remove the member and drill the new holes and reinstall.
|
I would initially say that I was pretty sure things were nice and inline with the driveshaft, but with a floor jack supporting the tail of the transmission and a lot of work to get the bolts in, its possible. I will check this weekend to see if thats the case. If it is I can readjust the mounting positions.
Gavin
12-12-2007, 06:10 PM
Threaded Mode
