Where do I order it? I don't see it here. TIA

__________________
1984 300TD

there was a group buy for them- special run, I beleive. you may be SOL.

__________________
1984 123.193 372,xxx miles, room for Seven.

1999 Dodge Durango Cummins 4BTAA 47RE 5k lb 4x4 getting 25+mpgs, room for Seven.

Do you mean the Superior shift kit for the tranny?

http://www.bulkpart.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=2&Product_Code=S68165D

yes, thank you. Fastlane doesn't carry it?

__________________
1984 300TD

Ordering this tonight. Is there a DIY write up for this? TIA

__________________
1984 300TD

I think the kit may have the instructions. I don't recall any writeup on it on the site. Advise when you get it, please.

I installed the K1 and K2 springs from the kit with no problems. The included instructions are limited, but sufficent. There are several write ups for the K1 kit from Mercedes, and most of those would be applicable.

Here's a thread on the Superior Kit: Superior Shift Correction kit - anybody tried one?

Here's some instructions on the K1 kit: http://articles.mbz.org/transmission/k1/
http://www.hevanet.com/patbob/MercedesK1SpringKit/SpringKitInstall.html

Hope this helps.

This reminds me that I should get back to my shift kit installation video series for the Superior kit and the 722.3xx series. I pulled a valve body and everything and started the videos but then I got side tracked. I had plans to illustrate the whole kit and installation into the valve body. I was even going to split the valve body and show that procedure. I hope I can get this done on my car and make the video within 6 months. Things have just been taking priority lately; like getting married, etc!

__________________
1991 F250 super-cab 7.3 IDI. (rebuilt by me) Banks Sidewinder turbo, hydroboost brakes, new IP and injectors.
2003 S430 - 107K
1983 300SD - Tanoshii - mostly restored ~400K+.
1983 300SD - Good interior. Engine finally tamed ~250K.
Monark Nozzle Install Video - http://tinyurl.com/ptd2tge

Congrats.

__________________
83 SD

84 CD

Thanks! I should be more accurate and say engaged. We are not married yet but on 10/11/2014 we will be.


The videos I plan to do would go over installing springs in every piston just for the sake of reference.

__________________
1991 F250 super-cab 7.3 IDI. (rebuilt by me) Banks Sidewinder turbo, hydroboost brakes, new IP and injectors.
2003 S430 - 107K
1983 300SD - Tanoshii - mostly restored ~400K+.
1983 300SD - Good interior. Engine finally tamed ~250K.
Monark Nozzle Install Video - http://tinyurl.com/ptd2tge

I ordered mine from ebay.

Word of warning: Install only the parts of the kit you think you need! I found the stacked shift correction spring made my trans shift way too late and I had to take everything apart a 2nd time.

-J

__________________
1991 350SDL. 230,000 miles (new motor @ 150,000). Blown head gasket

Tesla Model 3. 205,000 miles. Been to 48 states!
Past: A fleet of VW TDIs.... including a V10,a Dieselgate Passat, and 2 ECOdiesels.
2014 Cadillac ELR
2013 Fiat 500E.