![]() |
|
|
|
|
#1
|
|||
|
|||
tango has got the right idea but its attached the ccu unit not the glovebox
__________________
1986 300SDL, 211K,Dealership serviced its whole life 1991 190E 2.6(120k) 1983 300D(300k) 1977 300D(211k) |
#2
|
|||
|
|||
okay, Is it behind the CCU? I had it out and it wasn't part of the CCU? Thanks for everyone's help thus far, but I have looked and must be over looking it.
I had seen the picture of the part too.
__________________
![]() |
#3
|
|||
|
|||
Quote:
With the glove box liner removed, both the blower regulator and temp regulator should be easy to see. The MB Electrical Manual describes the location as "behind the glove box." That's where it is on my '82 300D. Last edited by tangofox007; 09-06-2009 at 12:20 AM. |
#4
|
|||
|
|||
Quote:
Remove the glovebox and its right there
__________________
1986 300SDL, 211K,Dealership serviced its whole life 1991 190E 2.6(120k) 1983 300D(300k) 1977 300D(211k) |
#5
|
|||
|
|||
I did see the temp regulator and ever pics up an extra one from the bone yard today.
I also picked up and extra blower motor and resistor. Is the blower motor regulator located under something?
__________________
![]() |
#6
|
|||
|
|||
Sorry to keep you up? I will look again tomorrow? If you have a snap shot of it and its location, that would really help. Thanks again to you and everyone else for your assistance.
![]()
__________________
![]() |
#7
|
|||
|
|||
The book shows the blower regulator mounted just to the right of the temp regulator.
|
#8
|
|||
|
|||
Thanks, I will look real good tomorrow in the daylight.
__________________
![]() |
#9
|
|||
|
|||
lol its ok
__________________
1986 300SDL, 211K,Dealership serviced its whole life 1991 190E 2.6(120k) 1983 300D(300k) 1977 300D(211k) |
#10
|
||||
|
||||
Blower regulator
Most likely you can't see the regulator is because it is black. After removing the glovebox liner, look up, next to the silver box.
|
#11
|
|||
|
|||
BINGO CD PLAYER AND THE REST OF YOU GUYS.....
Found it right under the dash behind the glove box insert. It was right next to the silver box. Got it out now and will go to the bone yard and get a replacement. I now have all of the possible parts that could be defective. Thanks for all of your help. Thanks Again, Ron
__________________
![]() |
![]() |
Bookmarks |
|
|