|
|
|
#1
|
|||
|
|||
Help on aux fuse kit for blower motor, 603 engine
I have searched and checked out the DIY articles with no luck. The manual leaves me confused.
Anyone BTDT? Thanks Harry |
#2
|
||||
|
||||
Specific questions/problems? It's an easy job.
Jeremy
__________________
"Buster" in the '95 Our all-Diesel family 1996 E300D (W210) . .338,000 miles Wife's car 2005 E320 CDI . . 113,000 miles My car Santa Rosa population 176,762 (2022) Total. . . . . . . . . . . . 627,762 "Oh lord won't you buy me a Mercedes Benz." -- Janis Joplin, October 1, 1970 Last edited by whunter; 01-13-2010 at 11:49 AM. Reason: attached picture |
#3
|
|||
|
|||
Thanks for the response Jeremy.
The manual reads, "Pink and Grn wire, connect to input, fuse 16, with terminal from aux wiring harness" It reads like there is something like a screw or nut for this connection, so I'm okay with this part This is where I'm confused. "blk & grn wire, disconnect from output, fuse 16, and connect with aux wire to single pin terminal block". Huh? Confession, I have not gone under the fuse box yet or it might be more clear to me. My excuse is that after I searched here, google advanced search and two other sites, I decided to attempt a DIY write up with pictures. I am waiting on a camera I ordered from Woot a few days ago that my BIL says even an idiot can use (me), we'll see. Walk me through it if you don't mind. BTW, during my search efforts, I saw a number of problems that this upgrade would have benefited. Thanks for your help. Harry |
#4
|
|||
|
|||
Got it done
Jeremy
Thanks for your help. I'm going to start a new thread and do a write up with pictures, I hope. This will be my first and pictures are not playing fair. Thanks Harry |
Bookmarks |
|
|