Thanks for that correction, I was reading too fast

It also appears that the W124 CD / online link I sent is pretty useless for the bolt sequence, you can't read them on the pdfs...

__________________
1982 240D, sold 9/17/2008
1987 300D TurboW124.133 - 603.960, 722.317 - Smoke Silver Metallic / Medium Red (702/177), acquired 8/15/2009
262,715 and counting

ok i got the tighten order down. it has the 4 stage process but it has the first two in 15 nm and then 35nm then 90 degrees. what does the nm equal to on the ft lb torque wrench? i don't have a torque wrench that does the nm. after i torque to 35nm (whatever the equls to on ft lbs) then 90 degrees does that mean a quarter of a turn? and wait ten min then another quarter turn? also what is the ft lb on the cam bolts and the cam gear bolt? thank you