Is this a 123 or 124? Year would help here.

If a 124, seems that the switches would be unaffected by the wood R&R as they don't lift with the wood, does the rear switch light up indicating it has power?

__________________

Gone to the dark side

- Jeff

1984 300TD
Update. I pulled the switches and cleaned them. Thanks for posting DIY link. It was very helpful and really not a bad job at all. Now for the bad news it did not make a difference. My left front and right rear windows still do not work. The other two work fine. Thanks again for all the suggestions.

This what I have done so far.
1. Checked switches (working) Cleaned Switches
2. Check voltage on all four switches. Each one is getting 12V
3. Checked for broken wires. None found
4. Checked resistance at fuse 0.0Ohms (hope I did that right)



I think the next step will be to remove a door panel and see if I an get the motor to run.