I'm trying to remove the lower control arm on my 1986 300SDL and the eccentric bolt appears to be fused to the bushing.

I've tried AeroKroil, heat and a hammer and it isn't budging.

I'm thinking I might have to try and fit the Sawzall under there and cut the bolt on either side of the bushing to get it out.

When I applied the heat I used a MAPP torch but didn't heat it long enough for the bolt head on the other side to be hot. It was warm but the bushing started smoking so I stopped.

Is there a better way to get this bolt out?

__________________
Chad
2013 Jeep Unlimited Rubicon
OBK#44
"Pleasure in the job puts perfection in the work." - Aristotle (384-322 B.C.)

SOLD
1985 300TD - Red Dragon
1986 300SDL - Coda
1991 - 300TE
1995 - E320
1985 300CD - Gladys
2006 Nissan Pathfinder LE
1998 Acura 3.0 CL