|
|
|
#1
|
||||
|
||||
rearview removal help
I need to take my rearview mirror off and have read john hef's post(just pull hard towards drivers side) and alas this has not been successful in the least.While sitting in drivers seat does it go left.....right or towards and away from self? The base is slightly loose and I am sure that is going to make it even more fun.I am trying to get to the A-pillar drain tube from sunroof.
|
#2
|
|||
|
|||
As you sit in the drivers seat, pull down and twards your chest. Just when you think it will break, it either will or come down.
__________________
1979 240D Caledonia Green/cream gone 1982 240D stick Ivory/Palimino 1999 E300D White/grey |
#3
|
||||
|
||||
I push forward when they don't pull easy
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#4
|
|||
|
|||
Or just sit there and wish it was the neck of (fill in the blank). Tug back and forth with such vigor, a passerby will think you are crazy and look away. Then it will drop right into your hand.
__________________
1979 240D Caledonia Green/cream gone 1982 240D stick Ivory/Palimino 1999 E300D White/grey |
#5
|
||||
|
||||
They are designed to break away forward, I designed them.
Pulling to the side can damage the mounting plate, and is pulling against only one screw. Pulling directly toward the rear of the car is the second-best method, works also.
__________________
Gone to the dark side - Jeff |
#6
|
|||
|
|||
a quick shot of pb blaster released one that was stuck
__________________
'83 SD, 2x '85 SD You are entitled to your own opinions, you are not entitled to your own facts. |
#7
|
||||
|
||||
still wont come off!!I have pulled down and back, down and forward.Hammerwrench and hammer.bracket is loose, no more than it was, but still loose.Any other thoughts, out of PB, have deep creep.Gonna try again in the am, have to get it off , to get interior head piece off,to get to those drains.
|
#8
|
||||
|
||||
Try this.
Hold it tightly by the neck with one hand, and SMACK your hand with the other hand. it should pop right out.
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#9
|
||||
|
||||
looks like I am going to need another set of hands to help.With the bracket loose I cant seem to get enough pressure down and towards windshield(or away for that matter) alone.Gonna get someone to tap mount as I pull down. In the meantime because bracket is loose I sadly anticipate either broken mirror or mangled mount.Anyone know of the matched set for sale used?I would like to get mirror and bracket it mounted to, hopefully this will insure a snug fit when replaced.
|
#10
|
|||
|
|||
I tryed to get the mirror off in my 92 300D and the old one is still in there, I was affraid I was going to break something.
|
Bookmarks |
|
|