|
|
|
#1
|
||||
|
||||
Why is the AC on older MB cars "weak"?
As I was stuck in traffic coming home today I was thinking... it's 100*F out according to the temp sensor on the bumper of my TDI, and the AC is spitting out glorious 41*F air with the fan on maximum and the resirc door closed. Turn off resirc and it would blow 60*. A 40*F drop at idle is quite impressive IMHO, moreso when you look at the 260,000 mile condenser and notice how many fins are bent over. I could feel the radiator fans kicking on and off of high speed. VW has used variable displacement compressors since 1993, so the clutch never disengages when the AC is un unless the evaporator starts to ice up.
From what I've heard others say I could not expect this kind of performance from my SDL, even if it still had R12. What about the Benz's system makes it have worse performance? Size of the evaporator or condensor too small? Compressor doesn't flow enough volume? In a perfect world could you install different parts to increase capacity? I'd love to find a way to install a variable displacement compressor so the clutch wouldn't have to cycle all the time. I guess this delves a bit into AC theory, but that's something I'd like to know more about -Jason
__________________
1991 350SDL. 230,000 miles (new motor @ 150,000). Blown head gasket Tesla Model 3. 205,000 miles. Been to 48 states! Past: A fleet of VW TDIs.... including a V10,a Dieselgate Passat, and 2 ECOdiesels. 2014 Cadillac ELR 2013 Fiat 500E. |
#2
|
||||
|
||||
I have a friend (Always starts like that huh ) who's done a few AC retrofits on US cars. He's a big fan of the GM V5 which is a variable displacement compressor. He's used it with success on systems which used the Delphi C4 compressor.
No experience with MB but he seems to think it would be a good replacement for the C4 in my W116. No low pressure switch required because it's variable displacement and will just stop pumping if the pressure gets low. The V5 is also pretty compact and light plus you can find them with V belt pulleys. Not sure if it would be better than a properly functioning C4 but it could be a decent replacement.
__________________
My occupational hazard bein' my occupation's just not around... 1980 300SD 1980 300SD |
#3
|
|||
|
|||
Quote:
- Peter.
__________________
2021 Chevrolet Spark Formerly... 2000 GMC Sonoma 1981 240D 4spd stick. 347000 miles. Deceased Feb 14 2021 2002 Kia Rio. Worst crap on four wheels 1981 240D 4spd stick. 389000 miles. 1984 123 200 1979 116 280S 1972 Cadillac Sedan DeVille 1971 108 280S |
#4
|
||||
|
||||
Just finished redoing my AC in the 300TD. I went ahead and installed a new condensor b/c the old one was pretty beat up after 30 years of sitting out in front of the car.
I reloaded with R12, and I would not call the system weak. We had a heat index of 102 yesterday with high humidity, and I had to turn it down to the middle of the white part of the wheel b/c it was so cold. I think old bent or dirty fins on evaporators and condensors, leaky old hoses, and bad r134a retrofits lead to that complaint.
__________________
Current Mercedes 1979 maple yellow 240D 4-speed Gone and fondly remembered: 1980 orient red 240D 4-speed Gone and NOT fondly remembered: 1982 Chna Blue 300TD Other car in the stable: 2013 VW Jetta Sportwagen TDI / 6-speed MT |
#5
|
|||
|
|||
If you read enough threads, some will say their factory OE AC with R-12 is ice cold, low 30's for vent temps and turns their hands blue. Maybe true, but most likely AC performance in the older cars is dependent on the condition and cleanliness of the components and the charge.
Thoroughly clean all the heat exchangers (radiator, condensor, evaporator, heater core), make sure there's no weirdness going on with the heater adding heat due to malfunctioning valves, then see what happens. That's probably easier than re-plumbing for a new compressor design, particularly since the refrigerant and air still has to use those same components regardless of the source of the compressed R-12. |
#6
|
|||
|
|||
My experience on my 85 300 SD is that it only got down to 60 degrees when I bought it with R134. About a year or so later the compressor started making noise so I took it to an ac shop for new compressor, exp valve, and dryer. While it was there I changed to a new parallel condenser since I had read of good results (lower temp) over the stock unit. Still only blew 60 degrees at the center vent. A few years later I changed refrigerant to propane/butane mix cause I read of lower temps. Still only gets 60 degrees so I gave up throwing money at it. For some unkown reason my 300SD ac is junk and extreme disappointment. 2 ac shops don't know anything else to do to it. Also, I know that the heat is off. New mono with 12v applied.
My 190E blows 48 to 50 degrees with stock parts and R134. Go figure. I haven't fixed my SEC ac because of the results on the 300SD. Your results may vary.
__________________
85 300 SD ~ 115K 82 500 SEC Euro ??K 78 450SL 164K |
#7
|
||||
|
||||
My 124s with R-12 when new had ice-cold A/C even idling outside a store waiting for the wife to "dash in and out" (usually took longer than that) or idling in traffic, they worked great.
The '94 and '95 with their native R-134a systems were also ice cold. If yours isn't, it should be and needs an expert and probably an open checkbook to get it back to original performance.
__________________
Gone to the dark side - Jeff |
#8
|
||||
|
||||
MY 87 has been converted to 134 in the past, and it works just fine. it was upper 90's with near 100% humidity, I have to turn down the temp to drive... glass foggs up on the outside, or hands turn blue.
it's all about cleanliness, and components.
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#9
|
||||
|
||||
The truth is German cars simply didn't have the best AC systems back then. Sufficient? Yes, but not the best. A salesman at a MB dealer told me a story about when he worked at a BMW dealership. Some BMW executives came to Houston in the summertime and drove a rented Lincoln or Cadillac from the airport to the dealership with the AC on full blast. At the BMW dealership, they got into a new BMW and asked if the AC was on full blast because they were feeling a little hot. They were told "it is at full blast!"
I know my 82 300D's R12 system doesn't cool the car down as fast or as powerful as my dad's 02 Caddy, but it keeps me from breaking into a sweat in the summer and that's enough.
__________________
'81 MB 300SD, '82 MB 300D Turbo (sold/RIP), '04 Lincoln Town Car Ultimate Sooner or later every car falls apart, ours does it later! -German Narrator in a MB Promotion Film about the then brand new W123. |
#10
|
|||
|
|||
I was in Leipzig in July once. I don't know what the temperature was exactly, but I'd classify the weather as "slightly warm". I noticed that none of the buildings around seemed to have air conditioning (lots of open windows). Mercedes used to only really design for their domestic market and lagged behind on those things such as air conditioning and automatic transmissions that weren't very important in their domestic market. They finally fixed the transmissions around 1977, and it sounds like they fixed the AC about ten years after that.
__________________
Whoever said there's nothing more expensive than a cheap Mercedes never had a cheap Jaguar. 83 300D Turbo with manual conversion, early W126 vented front rotors and H4 headlights 400,xxx miles 08 Suzuki GSX-R600 M4 Slip-on 22,xxx miles 88 Jaguar XJS V12 94,xxx miles. Work in progress. |
#11
|
||||
|
||||
Quote:
On my TD I removed/cleaned/flushed/etc, new compressor(read: NEW), expansion valve, dryer, o-rings, aux fan. Confirmed no mono valve leaks... then charged with R12 after an appropriate vacuum. Didn't like the results so I re-purged and filled again with R12. I still think the a/c sucks. My 400E had very cold a/c with the factory R134. I need another 400E
__________________
08 R320 CDI current Past 95 E420 87 300D Turbo 5spd 90 300TE 83 300SD 85 300TD 92 400E 85 190D |
#12
|
|||
|
|||
My Lincoln Town car had an R-12 system that I converted to 134. Even on 134 in Georgia in the summer, the thing would still freeze you out if you put it on full blast.
__________________
Whoever said there's nothing more expensive than a cheap Mercedes never had a cheap Jaguar. 83 300D Turbo with manual conversion, early W126 vented front rotors and H4 headlights 400,xxx miles 08 Suzuki GSX-R600 M4 Slip-on 22,xxx miles 88 Jaguar XJS V12 94,xxx miles. Work in progress. |
#13
|
||||
|
||||
Maybe I need another SHO
They have nice a/c as I recall. I had a friend in HS that had one of those old Volvo wagons, he said if you turned the a/c on the engine would over heat. They bought it new in the 80's, couldn't use the a/c since day one Old MB a/c could be worse I guess
__________________
08 R320 CDI current Past 95 E420 87 300D Turbo 5spd 90 300TE 83 300SD 85 300TD 92 400E 85 190D |
#14
|
||||
|
||||
System capacity and lack of ability to remove heat from the system (condenser).
My 750iL is almost 4.3lbs of R12... best the W126 had was 2.9lbs. Significant difference. '85+ W126s at least received a better condenser (tubes are smaller) and a bigger aux fan. Late 126s had dual aux fans. Also the size of the main cooling fan plays a big part into pulling air across the condenser too Tint makes a world of difference too. Stick with R12 on these cars or go the extra step to a parallel flow condenser if you plan to use an alternate refrigerants. I am actually curious how a parallel flow would work with R12.
__________________
I'm not a doctor, but I'll have a look. '85 300SD 245k '87 300SDL 251k '90 300SEL 326k Six others from BMW, GM, and Ford. Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG] |
#15
|
||||
|
||||
Quote:
In my TE on a hot/humid cloudy day, the a/c will run me out. On the exact same hot/humid day but with sun, I am cool but not cold. I like to be cold on hot/humid days. I need tint. I have plenty of R12 and too have wondered about using a parallel flow condenser.
__________________
08 R320 CDI current Past 95 E420 87 300D Turbo 5spd 90 300TE 83 300SD 85 300TD 92 400E 85 190D |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|