here is a pic

Send it to the parts link and get a proposal.

I think it may be time to change out the cable when the plastic piece gets fully extended.

Attached Thumbnails

 

__________________
Jim

Your pic is interesting. It looks like the same part is broken off on yours. Out of the pic to the left, is there a free-floating black piece with some white plastic within it? That's what I have....it looks like it was originally connected to the end of the screw drive.

__________________
14 E250 Bluetec 4Matic "Sinclair", Palladium Silver on Black, 154k miles
06 E320 CDI "Rutherford", Black on Tan, 172k mi, Stage 1 tune, tuned TCU
91 300D "Otis", Smoke Silver on Tan, 142k mi, wastegate conversion, ALDA delete

19 Honda CR-V EX 61k mi
Fourteen other MB's owned and sold
1961 Very Tolerant Wife

Now I'm figuring it out: the broken piece, still threaded on the cable, is what prevents the adjusting screw from becoming unscrewed too far. But as long as it's screwed to basically that point, there shouldn't be any problems....unless somehow vibrations or what not could cause it gradually to unscrew.

__________________
14 E250 Bluetec 4Matic "Sinclair", Palladium Silver on Black, 154k miles
06 E320 CDI "Rutherford", Black on Tan, 172k mi, Stage 1 tune, tuned TCU
91 300D "Otis", Smoke Silver on Tan, 142k mi, wastegate conversion, ALDA delete

19 Honda CR-V EX 61k mi
Fourteen other MB's owned and sold
1961 Very Tolerant Wife

I think that's basically where I am....fully extended then piece broke.

__________________
14 E250 Bluetec 4Matic "Sinclair", Palladium Silver on Black, 154k miles
06 E320 CDI "Rutherford", Black on Tan, 172k mi, Stage 1 tune, tuned TCU
91 300D "Otis", Smoke Silver on Tan, 142k mi, wastegate conversion, ALDA delete

19 Honda CR-V EX 61k mi
Fourteen other MB's owned and sold
1961 Very Tolerant Wife

I looked at my parts car today... it's broken.
also, my 87TD had a starter go bad, and I broke that part while I was changing it... a little plastic jb weld and it's as good as new.

__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread
"as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do!

My drivers:
1987 190D 2.5Turbo
1987 190D 2.5Turbo
1987 190D 2.5-5SPEED!!!

1987 300TD
1987 300TD
1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere!

JB Weld....that's a good idea....I'll try that.

__________________
14 E250 Bluetec 4Matic "Sinclair", Palladium Silver on Black, 154k miles
06 E320 CDI "Rutherford", Black on Tan, 172k mi, Stage 1 tune, tuned TCU
91 300D "Otis", Smoke Silver on Tan, 142k mi, wastegate conversion, ALDA delete

19 Honda CR-V EX 61k mi
Fourteen other MB's owned and sold
1961 Very Tolerant Wife