Please enlighten me.

Is there a catalytic converter in a 1995 E300D?
If there is what is the part number?

Thank you.

Yes there is. I don't know the p/n. Do not gut it unless you want the car to sound like a "ricer" between 2000 and 2500 rpm.

__________________
Jim

Which sort would it be?

DOC - DPF?

Catalytic converter - Wikipedia, the free encyclopedia

(Sorry I'm curious - just for kicks)

__________________
1992 W201 190E 1.8 171,000 km - Daily driver
1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone
1965 Land Rover Series 2a Station Wagon CIS recovery therapy!
1961 Volvo PV544 Bare metal rat rod-ish thing

I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior



Don't leave that there - I'll take it to bits!

Use a test pipe.

__________________
1999 w140, quit voting to old, and to old to fight, a god damned veteran, deutschland deutschland uber alles uber alles in der welt

pardon my ignorance, but what do you mean by sounding like a "ricer". we are putting a 99 tc 606 in the war department's 95 300d and was planning on gutting the converter that is in it. will she notice the sound difference? i would hate for her to be embarrassed driving to walmart.

thanks, hunt

thanks

IMHO if you still have a muffler it won't be bad. Moreso if that 99 still has its turbo (IE spinny muffler )

-J

__________________
1991 350SDL. 230,000 miles (new motor @ 150,000). Blown head gasket

Tesla Model 3. 205,000 miles. Been to 48 states!
Past: A fleet of VW TDIs.... including a V10,a Dieselgate Passat, and 2 ECOdiesels.
2014 Cadillac ELR
2013 Fiat 500E.

Here is a good discussion of the term: What is the definition of "RICER"??? @ Car Forums

__________________
85 300D 75K Anthracite Grey 0-60 in 13 seconds **For Sale**
84 300D 333K Black (The Velveteen Rabbit) 0-60 in 14 seconds
00 Toyota Sienna 208K (Sold)
15 Subaru Outback 43K
11 Subaru Outback 67K
98 Ford Taurus 100K (Gertie - Was Grandma's - drove it to church and shopping - really) Daughter's car now.
30 Model A Ford 2 Door Sedan (Sold) 0-60 in . . . Never reached 60

Thanks for a quick reply.

I am not gutting it.
I bought one off eBay and it does sound obnoxious.
The muffler shop showed me the hack job that was done to it. The exhaust system was replaced with a straight pipe that was welded BADLY and it even hangs low making the car bottom out a lot.

Any idea how much it would cost to retrofit it with original parts?
Are used parts OK (especially the converter)?
Is there an aftermarket converter?
Assuming that it is not illegal, is there a silencer that would quite it down as much as a converter?

Thank you.

P.S Someone on another forum told me there is no catalytic converter on these cars!
Any comments?

Is there someone who sells such a product?
Will it keep the noise level down to the same level of a car with a converter?

Or are you talking about having a muffler shop fabricate a straight pipe?

Pretty sure this is what he is talking about.

In all likelyhood it won't be as bad with a turbo.

__________________
Jim

I just took a look at the EPC and this is what I have found for this paaticular car:

A1244908120 exhaust pipe front
A1244903715 exhaust muffler with pipe-central

Both parts look like they could be converters but neither one is called a converter in the EPC.

I tried to grab the picture to post here but could not do it.

the NAOM606 has a tuned exhaust from the factory, that combined with the inlet flaps is what causes torque in this engine as it is built like a free revving honda engine (oversquare bottom end with multivalve head) - except this engine uses diesel fuel to propel.

If you remove that single stage convertor you car will sound like a honda rice serving. The last muffler starts to rattle and then drone too. (heard between 2000-2500 rpm).

I first gutted mine - the cat shell then rattled too, so it sounded like beatup crap going down the road, I then had a shop make a Y pipe and kick out the kitty's skin - rattle quieted down but still had muffler rattle, I then dished out USD 150 for a magnaflow diesel cat. 2.25 inch pipes and 16 inches long in total, the exhaust guy put the Y pipe infront of the cat and welded it neatly and the (whipped cream smooth) sound of the OM606 returned.

The turbo engines will never emit the rice can sound as the turbo changes the exhaust into a long stream rather than the pulses of an NA engine and specially a car that has tuned headers like the E300D.

If its partially blocked - you can try cleaning it with some acidic solution (citric acid I think) install back and drive it like a stolen italian car - rev the bananas out of it to generate some serious heat in the exhaust to burn out the soot - dont worry about engine speed, this engine loves to rev to 5500 rpm and pulls hardest between 3500 and 5200 rpm.

__________________
2012 BMW X5 (Beef + Granite suspension model)

1995 E300D - The original humming machine (consumed by Flood 2017)
2000 E320 - The evolution (consumed by flood 2017)

I'm sure a better-sized resonator would help and be cheaper.

Sounds very encouraging.

Do you have a P/N for the magnaflow converter?
I went to their site but there was none to be found.

Thanks.

Do you know a place where one of those can be had?