Don't be so sure about sears being us made anymore

__________________
Current Diesels:
1981 240D (73K)
1982 300CD (169k)
1985 190D (169k)
1991 350SD (116k)
1991 350SD (206k)
1991 300D (228k)
2008 ML320 CDI (199k)
1996 Dodge Ram CTD (442k)
1996 Dodge Ram CTD (267k)

Past Diesels:
1983 300D (228K), 1985 300D (233K), 1993 300D 2.5T (338k), 1993 300SD (291k)

Absolutely. That only applies to Craftsman (or did, not sure how that works recently). These are Pittsburgh.

__________________


Mac
2002 e320 4matic estate│1985 300d│1980 300td
Previous: 1979 & 1982 & 1983 300sd │ 1982 240d

“Let's take a drive into the middle of nowhere with a packet of Marlboro lights and talk about our lives.” ― Joseph Heller, Catch-22

I have a set of Craftsman open end box wrench that look like the Gear wrenches. Made in China.

Iam done with Harbor Fright sockets. I have a set of 3/8 deep impact sockets. never used with an impact wrench. I was using the 13mm to remove the nuts off the filter lid on a PNP 617 engine. the damn thing broke down 3 sides.
I was using my 10 inch craftsman chrome plated wratchet.

Then I have a deep 17mm 1/2 in drive on a 18 inch braker bar. use it to loosen the lug nits on the MB`s and to torque them down with the torque wrench. Iam again in a PNP nd see a wheel I want off a W124. just using the braker bar, the socket split down the side. this one was not used with the impact either.

Charlie

__________________
there were three HP ratings on the OM616...

1) Not much power
2) Even less power
3) Not nearly enough power!! 240D w/auto

Anyone that thinks a 240D is slow drives too fast.

80 240D Naturally Exasperated, 4-Spd 388k DD 150mph spedo 3:58 Diff

We are advised to NOT judge ALL Muslims by the actions of a few lunatics, but we are encouraged to judge ALL gun owners by the actions of a few lunatics. Funny how that works