I had a odd wobble in first before the turbo kicked in. I figured my flex disk was going bad or my center carrier bushing was bad.

Ended up being:





I could have ended up needing a new DS or worse yet a new everything!

Attached Thumbnails

   

__________________
http://superturbodiesel.com/images/sig.04.10.jpg
1995 E420 Schwarz
1995 E300 Weiss
#1987 300D Sturmmachine
#1991 300D Nearly Perfect
#1994 E320 Cabriolet
#1995 E320 Touring
#1985 300D Sedan
OBK #42

good catch.


.

How does that happen?

__________________
1977 300d 70k--sold 08
1985 300TD 185k+
1984 307d 126k--sold 8/03
1985 409d 65k--sold 06
1984 300SD 315k--daughter's car
1979 300SD 122k--sold 2/11
1999 Fuso FG Expedition Camper
1993 GMC Sierra 6.5 TD 4x4
1982 Bluebird Wanderlodge CAT 3208--Sold 2/13

Cant expect every bolt to be the same as the others!

__________________
http://superturbodiesel.com/images/sig.04.10.jpg
1995 E420 Schwarz
1995 E300 Weiss
#1987 300D Sturmmachine
#1991 300D Nearly Perfect
#1994 E320 Cabriolet
#1995 E320 Touring
#1985 300D Sedan
OBK #42

Probably has been replaced without new bolts & one has been over tightened or had to be forced to be loosened during prior work.
Little cracks grow in time !

__________________
Grumpy Old Diesel Owners Club group

I no longer question authority, I annoy authority. More effect, less effort....

1967 230-6 auto parts car. rust bucket.
1980 300D now parts car 800k miles
1984 300D 500k miles
1987 250td 160k miles English import
2001 jeep turbo diesel 130k miles
1998 jeep tdi ~ followed me home. Needs a turbo.
1968 Ford F750 truck. 6-354 diesel conversion.
Other toys ~J.D.,Cat & GM ~ mainly earth moving

Good catch. I lost the puley on my 240D about a year ago. Bolts can be bad.

__________________
Current Diesels:
1981 240D (73K)
1982 300CD (169k)
1985 190D (169k)
1991 350SD (116k)
1991 350SD (206k)
1991 300D (228k)
2008 ML320 CDI (199k)
1996 Dodge Ram CTD (442k)
1996 Dodge Ram CTD (267k)

Past Diesels:
1983 300D (228K), 1985 300D (233K), 1993 300D 2.5T (338k), 1993 300SD (291k)

Excessive acceleration!!!

Total win. Got a warning for excessive acceleration in TN.

That was the weak link. sure was a close one.

I have remove the DL several times with this 4-spd swap. how many time can these bolts be used? I know the nuts are the pinch/lock nuts, and probably should be changed each time. the bolts are pretty stout and are usually just hand tightened gootentite.

Charlie

__________________
there were three HP ratings on the OM616...

1) Not much power
2) Even less power
3) Not nearly enough power!! 240D w/auto

Anyone that thinks a 240D is slow drives too fast.

80 240D Naturally Exasperated, 4-Spd 388k DD 150mph spedo 3:58 Diff

We are advised to NOT judge ALL Muslims by the actions of a few lunatics, but we are encouraged to judge ALL gun owners by the actions of a few lunatics. Funny how that works

i don't think they stretch with each use, but when you buy a new flex disc they usually come with new bolts. just don't get a chinese brand get the good german stuff so you don't get a chinese bolt along with chinese plastic & rubber puck that will disintegrate the first time you do a massive burnout

__________________

According to the FSM on the w123 they are one use.

__________________
http://superturbodiesel.com/images/sig.04.10.jpg
1995 E420 Schwarz
1995 E300 Weiss
#1987 300D Sturmmachine
#1991 300D Nearly Perfect
#1994 E320 Cabriolet
#1995 E320 Touring
#1985 300D Sedan
OBK #42

I had a wierd noise from the engine one day and found one of the powersteering pulley bolts loose. Had that gone it would have been equally nasty with the serpintine belt.

__________________
http://superturbodiesel.com/images/sig.04.10.jpg
1995 E420 Schwarz
1995 E300 Weiss
#1987 300D Sturmmachine
#1991 300D Nearly Perfect
#1994 E320 Cabriolet
#1995 E320 Touring
#1985 300D Sedan
OBK #42

Those r pain and bolts strip easy pain to find exact.replacemeny

Turns out the PO of the transmission stuck a 80mm flexdisk on a 75mm yoke....

__________________
http://superturbodiesel.com/images/sig.04.10.jpg
1995 E420 Schwarz
1995 E300 Weiss
#1987 300D Sturmmachine
#1991 300D Nearly Perfect
#1994 E320 Cabriolet
#1995 E320 Touring
#1985 300D Sedan
OBK #42

Thanks for posting to this again --- I recently felt/heard a wobble in the 1984 300D --- it's down for a leaky water pump, so will add inspection of the flexdiscs and bolts to the list.

__________________
daw_two
Germantown, TN

Links:
Sold last car --- 05/2012 1984 300D Light Ivory, Red interior
No longer selling Cluster Needles Paint
No longer selling New Old Stock (NOS) parts

Past:
3/2008 1986 300SDL "Coda"
04/2010 1965 190D(c) "Ben"
& many more

Was the DS flange bolted through the disc directly to the trans flange rather than to the disc? ( and the other 3 holes of the disc bolted to the trans using different bolts )