Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #6  
Old 10-15-2012, 12:06 PM
Diesel911's Avatar
Registered User
 
Join Date: Sep 2007
Location: Long Beach,CA
Posts: 57,383
Quote:
Originally Posted by benzdude42 View Post
Thank you! Just what I was looking for.
I have not had a Steering Damper on my Car for over 5 years and have never missed it. In fact steering at low speeds in tight areas is easier without it.
Mine is still good but I removed it to Clean it and while it was off the Car I drove the Car and found out I did not need it at all.

The Torsion/Sway Bar has 2 Bushings were it pivots on the Chassis and there is 2 downet shaped rubber Bushings on each side where the Sway Bar goes through the Upper Control Arm.

It is also common for the Sway Bar Tips to have rust issues so they need to be inspected.
If they break off there is a repair for that.

If the Ball Joints in the Upper Contol Arms are no good the Whole Arm needs to be replaced.

If you have time to do so it is better to remove and inspect the parts and then order what you need.
__________________
84 300D, 82 Volvo 244Gl Diesel
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 02:03 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page