Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #14  
Old 11-14-2012, 05:14 PM
anghrist's Avatar
Registered User
 
Join Date: Sep 2006
Location: Lancaster, CA
Posts: 558
Splash Bowl Blockage: A possibility if the screen was crudded up badly.

Date: February 6, 2002
Order No.: P-B-47.10/23
Supersedes:
Group: 47
SUBJECT:
E-Class (W210)

Engine Performance / Check Engine Light with Code(s) P03xx
If you encounter instances in E-Class vehicles (W210) of engine misfire/lack of performance with low fuel level (below approx. 1/4) and/or "Check Engine Light" activated with code(s) P03XX (misfire detection), perform the following procedure.
Possible Cause:

Lack of fuel supply due to obstructed fuel supply opening to fuel pump in splash bowl. If tank level at time of misfire detection was low (below approximately 1/4), it is possible that the above described condition was caused by lack of fuel entering the splash bowl failing to feed the fuel pump due to foreign material blocking the fuel supply hole (Figure 1) (wit low fuel level, fuel enters only through supply hole at bottom of splash bowl).
Proceed as follows:
1.Ensure all related systems are working and within specifications - repair as necessary.
2.Check freeze frame for "fuel tank level", document freeze frame data and clear OBD memory.
3.Lower fuel level in fuel tank to approx. same level or lower than indicated in freeze frame.
4.Try to duplicate condition (load & RPM) as indicated on freeze frame and observe if engine misfires and/or misfire code is set.
5.Connect fuel pressure gauge and drive with high load/RPM and monitor fuel pressure. Fuel pressure should remain constant.

Note :
-Make sure codes are stored with fuel level ¼ or below (see freeze frame data) ,i.e. below top of upper splash bowl rim, and no fuel can enter the splash bowl from top opening.
-If misfire can be duplicated and/or misfire code(s) are set again during procedure in step 4 and 5 or fuel pressure starts to fluctuate during procedure in step 4, replace fuel tank.
-If, during procedure in step 4 no misfire is observed and/or no misfire code is set, and the fuel pressure remains stable during procedure in step 5, the cause for the customer complaint is other than described above and needs to be further diagnosed.
__________________
2013 Volkswagen Jetta Hybrid SEL Premium (Sparky)
http://badges.fuelly.com/images/smallsig-us/193500.png


It's a car not a science experiment! Open the throttle!
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 01:55 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page