Hey everyone,

So I got an alignment done last weekend and everything was fine for most of the week. Then towards the end of the week it started to pull to the right and generally piss me off. The front end on the 300D was rebuilt by the previous owner back in 2010 and drove pretty well.

I was going to go back up to the alignment shop Saturday but I accidentally slept in and missed the closing time.

Here is my alignment sheet from the shop, any thoughts on it?

I dont quite know much about alignments or which degree value corresponds to what aspect. They are the only shop that is open on the weekend and one of three in the area that do Mercedes.

Why are the values on the left not equal to values on the right? Especially in the first item? I believe that is caster?? and has to do with left/right steering? Shouldn't those two numbers be equal, would not a discrepancy cause pulling to one side or another?



I have to have my 190E aligned as well. It has all new suspension AND steering box....

__________________
Cruise Control not working? Send me PM or email (jamesdean59@gmail.com). I might be able to help out.
Check here for compatibility, diagnostics, and availability!

(4/11/2020: Hi Everyone! I am still taking orders and replying to emails/PMs/etc, I appreciate your patience in these crazy times. Stay safe and healthy!)


82 300SD 145k
89 420SEL 210k
89 560SEL 118k
90 300SE 262k RIP 5/25/2010
90 560SEL 154k
91 300D 2.5 Turbo. 241k
93 190E 3.0 235k
93 300E 195k