Quote:
Originally Posted by zeke
Can anyone tell me the correct belt size for a OM616? I asked Roll guy, but he has been out of pocket. Hoping to get the install finished tomorrow if I can get the right belt
|
See Rollguy's quote below
Quote:
Originally Posted by ROLLGUY
Along with the above fastener update, I have found that the belt that was sent with the kits is too long. The 15385 belts I had were for the Gen 1 kit. The proper belt is a 15375 (one inch shorter). If your adjustment screw is all the way out, your belt is too long. The photo below is with the long belt:
...
|
Rollguy uses a standard American belt sizing. If you were using a Contitech belt in MM, I believe or guess the belt size would be around 13 x 960 or 13 x 965.
06-23-2013, 01:34 PM
Hybrid Mode
