Actually, it looks like part 11 in this pic may be the part. What we were hoping to find, was some dimensions so we would know where to drill holes. I was thinking of leaving the spot welds intact and adding a S/S rivet or machine screw on each side. But may end up just drilling the welds out one at a time and rivetting. I see quite a bit of movement, so should do something before it gets worse.

PS: Did you have a good trip to Blighty?



item 5 in this pic (from MB South Atlanta)

__________________
Graham
85 300D,72 350SL, 98 E320, Outback 2.5