All windows work on some level, except the RF that will not roll down, only up.

I have cleaned the switches with contact cleaner and silicone grease.

I have confirmed that I have continuity from the console plug to both connections at the RF motor, so I am really lost. Am I getting a false reading somehow?

I have swapped in what I believe to be a good right side switch, no change. It might be nice to have someones' help to jumper connections at the plug to see if I can make it happen that way.


I am open to any and all suggestions at this point. TIA

Does anyone have a Clear wiring diagram for this then? I have one, but I can't read it very well.

Looks like another switch fixed the problem, finallllllly!