Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 02-06-2015, 03:38 PM
Zacharias's Avatar
Not so amused
 
Join Date: Apr 2010
Location: West Quebec
Posts: 4,025
Driver mirror won't move - w123

I damaged my driver mirror recently, so I went and pulled two spares out of my parts shed. They have no doubt been sitting there for at least 7 years.

Unfortunately on both of them the mirror is stuck in place. The adjuster arm won't move, and neither will pressing on the mirror make it budge.

I have tried spraying penetrating oil inside, no change.

Suggestions?

__________________


Mac
2002 e320 4matic estate│1985 300d│1980 300td
Previous: 1979 & 1982 & 1983 300sd │ 1982 240d

“Let's take a drive into the middle of nowhere with a packet of Marlboro lights and talk about our lives.” ― Joseph Heller, Catch-22
Reply With Quote
  #2  
Old 02-06-2015, 07:50 PM
Registered User
 
Join Date: Sep 2007
Location: Calgary Alberta Canada
Posts: 2,058
It has been many years since I replaced the control arm but it only took an hour or so. Pop out the mirror pry gently on the putter most sides it is held in by a ball and socket. Everything will be exposed and can be dissambled clean lubricate and readjust tension. There is a good DIY somewhere.
__________________
92 e300d2.5t
01 e320
05 cdi
85 chev c10
Reply With Quote
  #3  
Old 02-06-2015, 08:35 PM
unkl300d's Avatar
Registered User
 
Join Date: Jul 1999
Location: San Francisco, Ca
Posts: 2,490
I'd say keep at it with the penetrating fluid. Maybe wash it with dilute CLR

Amazon.com - Calcium, Lime, and Rust Remover - Bathroom Cleaners

Then rinse and respray with penetrating fluid.

I had a mirror that was not very movable and the penetrating fluid alone did the trick.

I'd try that before fussing with mirror removal... unless the backing glue is so dry that it pops off with ease...
__________________
1979 300D 220 K miles
1995 C280 109 K miles
1992 Cadillac Eldorado Touring Coupe 57K miles SOLD
********************
1979 240D 140Kmiles (bought for parents) *SOLD.
SAN FRANCISCO/(*San Diego)
1989 300SE 148 K miles *SOLD
Reply With Quote
  #4  
Old 02-18-2015, 01:08 AM
Zacharias's Avatar
Not so amused
 
Join Date: Apr 2010
Location: West Quebec
Posts: 4,025
Thanks for the input

But... had an idea.

Dishwasher.

So far so good. First pass and it now moves.

Going to put it on the lower rack this time... then CLR or penetrating oil mix after.

__________________


Mac
2002 e320 4matic estate│1985 300d│1980 300td
Previous: 1979 & 1982 & 1983 300sd │ 1982 240d

“Let's take a drive into the middle of nowhere with a packet of Marlboro lights and talk about our lives.” ― Joseph Heller, Catch-22
Reply With Quote
  #5  
Old 02-18-2015, 12:25 PM
unkl300d's Avatar
Registered User
 
Join Date: Jul 1999
Location: San Francisco, Ca
Posts: 2,490
Very clever !

Afterward, test the mirror adhesion a couple of times to make sure the old glue is not giving way.

No problem, just re-glue if needed.
__________________
1979 300D 220 K miles
1995 C280 109 K miles
1992 Cadillac Eldorado Touring Coupe 57K miles SOLD
********************
1979 240D 140Kmiles (bought for parents) *SOLD.
SAN FRANCISCO/(*San Diego)
1989 300SE 148 K miles *SOLD
Reply With Quote
  #6  
Old 02-18-2015, 02:01 PM
Fueled by coffee
 
Join Date: Apr 2012
Location: Worcester, MA
Posts: 472
I unfroze/relubed a W123 driver side mirror just this past weekend. My process was this:
  1. remove plastic inner mirror handle (pry out holding clip and slide off handle)
  2. carefully pry out and remove plasitchrome cover plate
  3. support mirror, then remove the 3 screws holding on the mirror and remove mirror from car
  4. pry the mirror itself at the outside edge to disengage the mirror glass backing from the ball socket
  5. slide the mirror glass backing toward the outside edge to disengage it from the mirror housing (take your time - you may have to fiddle with it a bit)
  6. put mirror glass aside for safekeeping
  7. Inside housing, remove the two phillips head screws and separate chrome backing from mirror mechanism frame
  8. pry off and remove rubber "boot" from handle/mechanism
  9. you should now have access to free up and relubricate the mirror
  10. once you've done so, reassembly/installation is reverse of removal
  11. use penetrating oil of choice and work slowly and carefully
Reply With Quote
  #7  
Old 02-18-2015, 03:33 PM
Zacharias's Avatar
Not so amused
 
Join Date: Apr 2010
Location: West Quebec
Posts: 4,025
Dishwasher is simpler

But seriously, thanks for the excellent writeup on that.
__________________


Mac
2002 e320 4matic estate│1985 300d│1980 300td
Previous: 1979 & 1982 & 1983 300sd │ 1982 240d

“Let's take a drive into the middle of nowhere with a packet of Marlboro lights and talk about our lives.” ― Joseph Heller, Catch-22
Reply With Quote
  #8  
Old 02-18-2015, 08:23 PM
Registered User
 
Join Date: Jan 2005
Location: Columbus, OH
Posts: 721
I Hope You Used A Bosch......

.......dishwasher that is...the one my wife swears by......if it was I'll have to let her know Bosch dishwashers are good for auto parts too!
__________________
'89 260e (212K Mi.), '92 400e (208K Mi.), '92 400e (not a misprint) (146K Mi.), '95 C220, '81 240D--Sold
Reply With Quote
  #9  
Old 02-19-2015, 12:10 AM
Zacharias's Avatar
Not so amused
 
Join Date: Apr 2010
Location: West Quebec
Posts: 4,025
Sorry, no metric appliance was available at the time. I went with Kenmore.

(Seriously, I do hear that Bosch appliances are way above the rest.)
__________________


Mac
2002 e320 4matic estate│1985 300d│1980 300td
Previous: 1979 & 1982 & 1983 300sd │ 1982 240d

“Let's take a drive into the middle of nowhere with a packet of Marlboro lights and talk about our lives.” ― Joseph Heller, Catch-22
Reply With Quote
  #10  
Old 02-19-2015, 02:20 AM
Stretch's Avatar
...like a shield of steel
 
Join Date: Sep 2009
Location: Somewhere in the Netherlands
Posts: 14,461
Quote:
Originally Posted by Zacharias View Post
...

(Seriously, I do hear that Bosch appliances are way above the rest.)
They used to be but these days the quality has dipped quite a bit in my opinion.

I've recently been very impressed by my Samsung tumble dryer and would probably consider the brand for other things too so long as the products don't connect to the internet and spy on me...

(hear about that? Is your smart TV SPYING on your family? Investigation reveals how much personal data television sets know about viewers | Daily Mail Online)
__________________
1992 W201 190E 1.8 171,000 km - Daily driver
1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone
1965 Land Rover Series 2a Station Wagon CIS recovery therapy!
1961 Volvo PV544 Bare metal rat rod-ish thing

I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior



Don't leave that there - I'll take it to bits!
Reply With Quote
  #11  
Old 02-19-2015, 02:18 PM
Zacharias's Avatar
Not so amused
 
Join Date: Apr 2010
Location: West Quebec
Posts: 4,025
Samsung likes to promote that image of indestructibility, but a recent expose here in Canada by a consumer affairs program reveals that their refrigerators have serious design defects that result in leaks and expensive repairs, sometimes only six months off warranty. Other makes as well.

Message: buy a fridge with all the goo-hahs (icemaker in particular) and expect trouble. They interview appliance repair techs and the basic message was: "They're all junk now, and pricey junk to fix." Not to mention that in some cases the water leaks resulted in damaged floors.

When you think about it, a one-year warranty on a fridge? Really? People here used to have 40-year old beer fridges in their garages, until the helpful folks at our utilities offered a bounty for junking them.

Back to Sammy: I have a Samsung dehumidifier that looks like a piece of modern art, compared to most, but has an inbuilt defect that results in random shutoff, and this meant that many have been junked (not economically viable to bring for service). I found the answer to the problem completely by accident so mine soldiers on.

__________________


Mac
2002 e320 4matic estate│1985 300d│1980 300td
Previous: 1979 & 1982 & 1983 300sd │ 1982 240d

“Let's take a drive into the middle of nowhere with a packet of Marlboro lights and talk about our lives.” ― Joseph Heller, Catch-22
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 11:16 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page