Suitable transmissions for 190D 2.5 manual conversion

[w123fanman]

Well I have spent some time researching 5 speed manual transmissions that would bolt up to an OM602 2.5NA that currently has a dead automatic in it (you can read my other threads, but the transmission only shifts into reverse and has water in the ATF). I came across this on BenzWorld, seems to be the same story as me: Transmission questions - Benzworld.org - Mercedes-Benz Discussion Forum
"INCOMPLETE LISTING

AT4: 722.4**
MT5: 717.4**

Getrag_275Z------------717.404
190D 2.2----------------717.410
190E ???----------------717.411
190D 2.5----------------717.413
190E 2.3 sportline-------717.413
190E 2.3----------------717.412/3
190E 2.6----------------717.432

Gear Ratio
717.404----------------4.08, 2.52, 1.77, 1.26, 1.00, R4.16, D3.07
717.410----------------4.23, 2.36, 1.49, 1.00, 0.84(0.81), R4.63, D3.42(3.23) (3.91>11/85)
717.411----------------3.91, 2.32, 1.42, 1.00, 0.78
717.412
717.413
717.432----------------3.86, 2.18, 1.38, 1.00, 0.80, R4.22, D3.27 >89 3.92"
I also saw this, the 250D which I assume was the same engine: Technical data for Mercedes 124 Sedan, Coupe, Estate: 124.125 (250D)
and as you can see, it says it was mated to the 717.410, 717.411, and 717.412. So question is, which of these should I be looking for? I'm looking for an overdrive to that takes the .404 out of the picture.
Also, for the conversion, will I need the master and slave cylinders off of the manual cars? Some "completes" kits have them, some don't and I really don't know enough about how they function to know if or why I need different ones.
I have 2-3 forum members offering me a manual swap, along with another member on here that informed me there was a kit available on BenzWorld (I couldn't find it myself) along with 3 or 4 that I have found on ebay, all of which I am trying to get the numbers on. Any problems with any of these transmissions that I need to look out for?
Also, what should I look for in terms of a rear diff?