Quote:
Originally Posted by derburger
It's possible the clutch master cylinder push rod is too long. I can't use the factory clutch bleed method (push fluid from the slave cylinder nipple) without unbolting the clutch master first, which seems strange. Maybe the pushrod is supposed to put little to no pressure on the clutch master when the clutch pedal isn't pressed. I could cut down the longer black 'w126' pushrod to test this theory.
|
If the clutch master piston is partially depressed,( from a long pedal to piston rod or adjustment issue. ) the slave won't fully release and could pump up to the point the clutch would over stroke.
If you cycle the clutch, leave the pedal up and open the bleeder, do you get a squirt of fluid or just a dribble. Is squirt, the master rod is too long / pedal free play non existent.
Slave cylinders are self adjusting, as long as the slave piston isn't bottomed out in the bore, the rod is proper length. There is a light spring in the slave that keeps the release bearing in light contact with the clutch cover release fingers.
01-22-2018, 07:13 PM
Threaded Mode
