I need an EZL, also known as an ignition control module for an m119 motor -- 1993 or later. Can anyone help me? Please email khari@kmc-law.com Thanks.

You want new or used ?

I can get you a deal on a new one or Beckman Technologies in NC will probably have used ones for cheap. They re-build them and are very good and reputable.

__________________
Jim

1992 500E
2007 CLK63
2003 Audi RS6
2001 Audi allroad

I was looking for used, but my understanding is that there is no way to rebuild these. By the time you open it up, you've completely destroyed it. What the best price?

I'll need your VIN number for the correct part number to get you a price.

Call Robert at Beckmann Technologies on the used one(s) ....(919) 381-2700 ... he'd be better able to tell you about them and if they were/are re-buildable. I was going to get a rebult EFP module from him but got a new one for free !! Thanx Carriage House Mercedes !!

__________________
Jim

1992 500E
2007 CLK63
2003 Audi RS6
2001 Audi allroad

New the EZL is something like $1500 wholesale, IIRC - ouch. For used, try Potomac German on the east coast, and Silver Star on the west coast. Those are the two larger (largest?) MB recyclers. No idea on cost, but I wouldn't pay over $200-$400 for a used one... if you hunt around long enough, you can probably get one for less from a yard that doesn't know what they're worth...

__________________
Check out my website photos, documents, and movies!

I had to replace my EZL too and when I called around enquiring about EZLs I found out that rebuilt EZLs for our 500E500s are not available. I ended up buying a used one from a recycler......

__________________
Vince

'94 E500 2 piece SL rims, chip, K&N Filter, HR Springs. Mesa Valve "Y" Pipe, ASR Defeat, BW NOS, S600 Grille, SL600 300mm rear brakes

I know this is after that is all said and done. You might want to put your questions in the "Technical" section of this forum next time. You might get more and faster responses next time.