It is lots of snow and -37 Celsius here in finland, but summer is coming soon. Then we drive Mercedes, and maybe go street car drag racing in airport.

Inside the hood:

-Old M104ce24v engine.
-Pistons machined -1mm from center. (5mm left as it was in sides.) Old pistonrings just re-honed cylinders.
- OM606 rod bearings
- 4plate special cluthplate (dont know what its called)
- megasguirt, HEI,+630cc injectors.
- Garrett GT47 74,5/88 + intercooler

No other changes!

http://www.youtube.com/watch?v=n5XNPyjRpGw&feature=channel


http://www.youtube.com/watch?v=yFx_U_Vgorg

Pistons was too weak to handle 1.3bar over 500hp 98E and compression of 10:1.

New engine coming soon:

-M104.94 2.8 Block

-90mm Turbo pistons

- H-Beam Rods

-Nava linea gasket 2mm

-M104.94 2.8 head, light porting job, inlet cam replaced by another Exhaust cam whith solid sprocket.

Piston machining edited.