![]() |
|
|
|
#1
|
|||
|
|||
I started making my own wheel rim adapters
This may not interest most of you, but I have cars which have a very particular problem.
400mm tires Put another way, earlier classic cars from Europe, like Lotus, Alfa, Citroen Panhard used 400 mm rims. Ya can't go to a tire store and buy the skins, because the rims are 15-3/4" in diameter. I have often seen such tires in Euro stores for up to 320 Euros each. Since I would need 15, that's a lot of cash. Instead, I did calculating and discovered that I could make an adapter that would fit the Citroen Traction Avant rims and enable the right sized 15" VW rim to fit. The tire would be 165 R80-15 and use a specific type of VW rim. I built one set of protoype adapters and they work great! Had to use Porsche racing studs and lug nuts for stability but they are hidden. The offset between the Citroen rims and these VW rims is within 5mm without modification, so I'm leaving it as is. I can also use Citroen hubcaps and the effect is overall pretty good. Bottom line: it's easier to do than you think and definitely worth it.
__________________
Strelnik Invest in America: Buy a Congressman! 1950 170SD 1951 Citroen 11BN 1953 Citroen 11BNF limo 1953 220a project 1959 180D 1960 190D 1960 Borgward Isabella TS 2dr 1983 240D daily driver 1983 380SL 1990 350SDL daily driver alt 3 x Citroen DS21M, down from 5 3 x Citroen 2CV, down from 6 |
Bookmarks |
|
|