Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > General Discussions > Off-Topic Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 11-03-2010, 04:43 PM
sunedog's Avatar
Registered User
 
Join Date: Nov 2003
Location: White Rock, SC
Posts: 206
Don't put a 100w bulb in a 75w fixture

I feel I am reasonably prudent when it comes to electrical matters. I wouldn't put a 100 watt bulb in a fixture rated for 40w or 60w. But I have probably routinely gone one size bigger when I was looking for more light and didn't think it would be a problem. Guess I was wrong.

Had to change a bulb in a recessed light in a walk in closet. The glass separated from the base when I tried to remove the spent bulb. I used a cut off piece of potato to try to remove the base and the socket pushed through the recessed fixture trim. So I removed the trim and was shocked (pun intended) to discover melted insulation on the neutral.

This looks like a fire waiting to happen. Thank goodness I had a reason to take this fixture apart.





__________________


Behind every great man is a great woman. Behind every great woman is a great behind.
Reply With Quote
  #2  
Old 11-03-2010, 05:02 PM
Registered User
 
Join Date: Oct 2007
Location: St. Thomas PA
Posts: 957
This would be a good time to start switching to CFL's- they don't have the current draw or the heat.
Reply With Quote
  #3  
Old 11-03-2010, 05:08 PM
MTI's Avatar
MTI MTI is offline
Registered User
 
Join Date: Nov 2002
Location: Scottsdale, Arizona
Posts: 10,626
Same applies to our cars . . . putting in a 7W "hyperwhite" wedge bulb in the 5W instrument cluster socket is eventually going to melt the plastic prisms in the older cars.
Reply With Quote
  #4  
Old 11-04-2010, 07:25 AM
pawoSD's Avatar
Dieselsüchtiger
 
Join Date: Oct 2004
Location: Grand Rapids, MI
Posts: 15,438
As was posted above....why the heck are you using incandescent bulbs? 100W? You can light a whole house with less power than that!

Step into the future. I even consider CFL's a "moderately dated" technology. I am slowly migrating most of my lighting to ultra-efficient LED's. Can light a whole room with less than 5W of power! And even the lower lifespan ones last over 20,000 hours!
__________________
-diesel is not just a fuel, its a way of life-
'15 GLK250 Bluetec 118k - mine - (OC-123,800)
'17 Metris(VITO!) - 37k - wifes (OC-41k)
'09 Sprinter 3500 Winnebago View - 62k (OC - 67k)
'13 ML350 Bluetec - 95k - dad's (OC-98k)
'01 SL500 - 103k(km) - dad's (OC-110,000km)
'16 E400 4matic Sedan - 148k - Brothers (OC-155k)
Reply With Quote
  #5  
Old 11-04-2010, 09:40 AM
MTI's Avatar
MTI MTI is offline
Registered User
 
Join Date: Nov 2002
Location: Scottsdale, Arizona
Posts: 10,626
CFL's, while popular and portrayed as "the future" isn't always the best choice for illumination.
Reply With Quote
  #6  
Old 11-04-2010, 10:58 AM
Stressed Member
 
Join Date: May 2004
Location: Florida Big Bend region
Posts: 721
I wouldn't bank on that damage necessarily being caused solely by using a 100 W bulb in a 75 W fixture.

A poor electrical connection can result in local resistive heating that really cooks things. Use of a higher-wattage lamp would of course aggravate such a condition (higher current, more resistive heating).
Reply With Quote
  #7  
Old 11-04-2010, 11:06 AM
Registered User
 
Join Date: Dec 2006
Location: beautiful Bucks Co, PA
Posts: 961
What's the payback time on a CFL used in a closet?
Reply With Quote
  #8  
Old 11-04-2010, 11:20 AM
Aquaticedge's Avatar
Bump on a log
 
Join Date: Nov 2009
Location: See Biography
Posts: 3,148
Quote:
Originally Posted by pawoSD View Post
As was posted above....why the heck are you using incandescent bulbs? 100W? You can light a whole house with less power than that!

Step into the future. I even consider CFL's a "moderately dated" technology. I am slowly migrating most of my lighting to ultra-efficient LED's. Can light a whole room with less than 5W of power! And even the lower lifespan ones last over 20,000 hours!
Where do you get em from?
__________________
hum.....
1987 300TD 311,000M Stolen. Presumed destroyed
Reply With Quote
  #9  
Old 11-04-2010, 11:36 AM
aklim's Avatar
Registered User
 
Join Date: Apr 2000
Location: Location: Greenfield WI, USA
Posts: 8,514
It might be a freak accident. Lets try THIS sucker to make sure.
__________________
01 Ford Excursion Powerstroke
99 E300 Turbodiesel
91 Vette with 383 motor
05 Polaris Sportsman 800 EFI
06 Polaris Sportsman 500 EFI
03 SeaDoo GTX SC Red
03 SeaDoo GTX SC Yellow
04 Tailgator 21 ft Toy Hauler
11 Harley Davidson 883 SuperLow
Reply With Quote
  #10  
Old 11-04-2010, 12:26 PM
sunedog's Avatar
Registered User
 
Join Date: Nov 2003
Location: White Rock, SC
Posts: 206
Quote:
Originally Posted by pawoSD View Post
As was posted above....why the heck are you using incandescent bulbs? 100W? You can light a whole house with less power than that!
I am steadily transitioning to CFL's. Haven't bought an incandescent in about two years. But I don't replace incandescents until they fail.

Quote:
Originally Posted by pawoSD View Post
Step into the future. I even consider CFL's a "moderately dated" technology. I am slowly migrating most of my lighting to ultra-efficient LED's. Can light a whole room with less than 5W of power! And even the lower lifespan ones last over 20,000 hours!
I've had several (at least 4 out of maybe 20) CFL's fail within 18 months even though the ratings say they'll last 8 - 11 years. Anyone else seeing this?

I was in Lowes yesterday and saw the LED's. They run upwards of $20 each. I'm not ready to shell that out until more data on their longevity is available.
__________________


Behind every great man is a great woman. Behind every great woman is a great behind.
Reply With Quote
  #11  
Old 11-04-2010, 12:30 PM
sunedog's Avatar
Registered User
 
Join Date: Nov 2003
Location: White Rock, SC
Posts: 206
Quote:
Originally Posted by Eskimo View Post
I wouldn't bank on that damage necessarily being caused solely by using a 100 W bulb in a 75 W fixture.

A poor electrical connection can result in local resistive heating that really cooks things. Use of a higher-wattage lamp would of course aggravate such a condition (higher current, more resistive heating).
Interesting. The connections to the socket are rivets done in the factory (you can see them in the second picture). The other end of the wires terminate in a molded connector that plugs into the recessed light trim. Doesn't seem likely that either end would be a poor connection.

BTW, this fixture was installed 21 years ago when I built the house.
__________________


Behind every great man is a great woman. Behind every great woman is a great behind.
Reply With Quote
  #12  
Old 11-04-2010, 12:56 PM
1990 500SL
 
Join Date: Oct 2003
Location: Hawthorn Woods, IL. USA
Posts: 329
CFLs have a LOT of issue's, I do use them where I can though.

MERCURY, requires special caustious disposal.
Not dimmable, I have most of my house on dimmers.
Longevity, heavily affected by on/off cycles.
Actually less efficient for fixtures that are turned on and off constantly, flourescents require a huge (relatively) power draw to start.
Color, getting better.
Cold start, not good for outdoors in cold climates.
Limited styles.
Slow start, I have several that take up to 5 minutes to produce full light.
__________________
KLK, MCSE

1990 500SL

I was always taught to respect my elders.
I don't have to respect too many people anymore.
Reply With Quote
  #13  
Old 11-04-2010, 02:00 PM
MTI's Avatar
MTI MTI is offline
Registered User
 
Join Date: Nov 2002
Location: Scottsdale, Arizona
Posts: 10,626
Philips makes a $60 12W LED bulb that is equal to a 60W . . . 25x the life, using 80% less juice . . .




The glow from the Philips EnduraLED is as comforting as Mom’s cooking, thanks to a special phosphor coating that absorbs the blue glare and transforms the light into a warm, golden hue — 2,700 degrees on the Kelvin scale. And using just 12 watts, the lamp matches the brightness of a 60-watt incandescent. Yet putting out all that shine exposes the LED’s kryptonite: heat. If diodes get too toasty, they’ll go supernova. So the Endura features cast-aluminum heat sinks to dissipate thermal energy from the LED panels. The result is a bulb that can screw into any socket, turn on instantly, and last 25 times longer than an equivalent incandescent, all while using 80 percent less power. Brilliant!
Reply With Quote
  #14  
Old 11-04-2010, 05:08 PM
1990 500SL
 
Join Date: Oct 2003
Location: Hawthorn Woods, IL. USA
Posts: 329
Quote:
Originally Posted by MTI View Post
Philips makes a $60 12W LED bulb that is equal to a 60W . . . 25x the life, using 80% less juice . . .




The glow from the Philips EnduraLED is as comforting as Mom’s cooking, thanks to a special phosphor coating that absorbs the blue glare and transforms the light into a warm, golden hue — 2,700 degrees on the Kelvin scale. And using just 12 watts, the lamp matches the brightness of a 60-watt incandescent. Yet putting out all that shine exposes the LED’s kryptonite: heat. If diodes get too toasty, they’ll go supernova. So the Endura features cast-aluminum heat sinks to dissipate thermal energy from the LED panels. The result is a bulb that can screw into any socket, turn on instantly, and last 25 times longer than an equivalent incandescent, all while using 80 percent less power. Brilliant!
I'm all for LEDs, but I cannot in anyway justify the cost.
I expect them to come down in cost soon.

One issue that I do not like it that one discussion of them refered to lamps etc being made with permament LEDs, so when the light does go the lamp etc is trash.
Seems wasteful at the expense of saving a few pennies.
I hope this does not come about.

I'll try sometime and calculate the cost differences, energy wise at least.

But lifetime estimates are tough.
New incandescents are better and last longer than they used to.
Since the vast majority of mine are on high end dimmers that ramp up and down, they are not subjected to that jolt when they come on, so they last MANY years.
The 5 in the family room are well over 10 years old and still going strong, the kitchen ones 6+ and the same thing.
But the exterior house lights rarely make 2 years, they are automaticly on about 6 hours a day, and the one in the laundry room (1 incandescent, 2 SLOW start CFLs) is replaced regularly also. It is on a strat switch, the reason it is there is the CFLs take a long time before they produce enough light to move around safely, once running they are fine though.

The ramp up down (IMHO) makes a HUGE difference in the lifespan of bulbs, as some others that are not on dimmers do need to be replaced more often.


The flourescents(regular tube) in my basement (18 bulbs), and garage (24 bulbs) are 10+ years old and I've only replaced a few.
__________________
KLK, MCSE

1990 500SL

I was always taught to respect my elders.
I don't have to respect too many people anymore.
Reply With Quote
  #15  
Old 11-04-2010, 05:12 PM
The Clk Man's Avatar
Saved By Grace
 
Join Date: Nov 2008
Location: Heaven Bound
Posts: 123
I put those curly cue light bulbs throughout my house and my electric bill went down $50 a month.

__________________
For the Saved, this world is the worst it will ever get.
For the unSaved, this world is the best it will ever get.

Clk's Ebay Stuff BUY SOMETHING NOW!!!
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 01:50 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page