House gas heater issues.....

		PeachParts Mercedes-Benz Forum > General Discussions > Off-Topic Discussion
House gas heater issues.....

LinkBack

Thread Tools

Display Modes

12-17-2018, 08:17 PM

HuskyMan

Banned

Join Date: Dec 2007

Posts: 5,061

I used Ace Hardware Pipe Thread Compound TFE paste on the threads then tightened the brass fitting down.

Here's what the bottle says:

"SLOW SETTING: Brushable paste dries slowly non-hardening, withstands up to 3000 PSI (gases) at temperatures from -50 degrees to +400F and 10,000 PSI (liquids) from -50 degrees to +500F. Use on water, steam, natural &LP gas, oils, fuels and dilute acids. "

I'm going to spray soapy water on it in the morning to make sure it doesn't bubble up.

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is On Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

All times are GMT -4. The time now is 09:02 PM.