Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 08-17-2004, 06:16 AM
Posts: n/a
W126 missing rear window fuse

Went to use my rear window demister the other day on my 89 560SEL.

Pressed the button, light came on, no demisting though after 5 minutes. Popped the bonnet and went to check fuse 3 which is listed as being the rear window demister fuse.

Strangely enough there isn't a fuse. There is a what looks like a metal bridge between two studs that you would expect the fuse holder to sit on. There is also a wire that has been connected to one of the screws into the stud and this runs off under the fusebox.

I am not sure what to do next, someone has obviously messed with it.

Can fuse holders be removed from the box?

I will get a pic when the weather here clears up.


Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 09:11 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page