![]() |
|
|
|
#1
|
||||
|
||||
Engine Mount Opinion (please take a look)
Hey everyone,
I just posted about my OVP, I decided that I need to divert more attention to the engine mounts.... is my passenger side mount collapsed? (See pictures) |
#2
|
|||
|
|||
Measure the distance between the bottom of the widest part of the mount and the frame parallel to the mount centerline axis.
It should be about 13 mm. The driver side is a little tougher to measure. Duke |
#3
|
||||
|
||||
huh? sorry duke but i don't have your very knowledgable vocabulary... can you give me the instructions again in idiot terms? thanks man!
![]() |
#4
|
|||
|
|||
I don't how how else to describe it. Stick a tape measure in and look for a little over 1/2" from the cross member to the bottom of the outer edge of the mount.
Duke |
#5
|
||||
|
||||
That's good enough!
Now I get it! Thanks for making it easier!
|
#6
|
||||
|
||||
It looks tired, you should feel no engine vibrations inside. I can't with a diesel under the hood.
Green coolant! ![]() ![]()
__________________
2016 Corvette Stingray 2LT 1969 280SE 2023 Ram 1500 2007 Tiara 3200 |
#7
|
|||
|
|||
Quote:
__________________
~Jamie _________________ 2003 Pewter C230K SC C1, C4, C5, C7, heated seats, CD Changer, and 6 Speed. ContiExtremes on the C7's. 1986 190E 2.3 Black, Auto, Mods to come soon..... |
#8
|
|||
|
|||
Duke2.6 gave you a good hint and here's another measurement to take.
The distance between the engine oil pan (front) and the anti-sway bar should be greater than 1 in. |
#9
|
||||
|
||||
Quote:
Look behind the washer bottle at the yellowing tank.
__________________
2016 Corvette Stingray 2LT 1969 280SE 2023 Ram 1500 2007 Tiara 3200 |
#10
|
|||
|
|||
Quote:
__________________
~Jamie _________________ 2003 Pewter C230K SC C1, C4, C5, C7, heated seats, CD Changer, and 6 Speed. ContiExtremes on the C7's. 1986 190E 2.3 Black, Auto, Mods to come soon..... |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
which brand of engine mount? | lizem100 | Tech Help | 5 | 11-10-2003 10:15 AM |
motor mount engine bracket | Harvey Gaspar | Diesel Discussion | 8 | 12-17-2002 01:01 PM |
you can replace oil cooler lines without removing engine mount - revisited | janko | Diesel Discussion | 1 | 09-10-2002 04:22 PM |
E320 Motor and Trans Mount : Replace or Not? | Johne 320 | Tech Help | 3 | 04-09-2002 04:30 PM |
How to get Access to the Driver's Side Engine Mount on 190E 2.3-16??? | JimSmith | Tech Help | 4 | 11-27-2001 10:57 PM |