I have a 300E and the engine idles a little rough, compression good, new plugs, rotor and cap, no vaccuum leaks so I suspect the injectors need cleaning, I was going to replace fuel filter and remove and clean injectors and wanted to ask if anyone knew the correct procedure on doing this and what kind of solution to soak and clean the injectors in, for aircraft engines I have used gun barrel cleaner but this is a Mercedes not a Cessna

__________________
Jerry

2004 SL500 Black 55K Miles
2002 s500 Black 90K Miles
1986 300E Gold 233K Miles
1966 Twin Cessna 320D
1989 Jeep Cherokee 233K Miles
1994 Ford Van E150 399K Miles

The proper way of doing this is to have them ultrasonically cleaned & flow-tested.
Look through the Yellow Pages for somebody that does this type of work.

__________________
2007 C 230 Sport.

bg 44k in a half tank of gas.