![]() |
|
|
|
#1
|
|||
|
|||
My '94 E220 is a bit noise until it reaches full temperature. It's some kind of hard rattle that disappears when either the RPM is brought over 2000 RPM or the engine reaches normal temperature.
I was starting to believe that something was wrong with the camshaft bearings or some lifter machanism until I used the stetoscope. The noise most certainly seems to origin from the thermostat. The thermostat is only 6 months old. When opened, it seems OK. Nothing loose and the spring is also OK. Could it be the thermostat and what should I do with it? Rgds, Gunnar Woldmo |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Drain coolant while changing thermostat on 92 300D 2.5 ? | kamil | Diesel Discussion | 2 | 12-21-2004 12:42 PM |
Installing new coolant | William | Tech Help | 2 | 08-09-2004 01:27 PM |
Coolant sensor circuit terminology | DPH | Tech Help | 0 | 03-13-2002 08:40 PM |
Mercedes 560 SEL Ticking Noise | Alseim | Tech Help | 12 | 10-27-2001 05:14 PM |
300SDL Loosing Coolant, but no visible leaks | MPlatt | Tech Help | 5 | 05-17-2001 05:14 PM |