![]() |
|
|
|
#1
|
||||
|
||||
Transmission Diagnosis using codes
Hello all,
I am posting this again in hopes of getting some fresh opinions on this topic. I took my car to my indie today hoping to find out what is causing the vibration I'm getting at @ 35-45 mph and 1300-1500 rpms. My mechanic started by pulling the codes from the engine, TCU and traction control modules. He got no readings from the engine and traction control but got 114 , 132 and 135 from the TCU. He said these codes are inconclusive and are kind of broad codes. He then cleared the codes drove the car around and pulled the codes again and got nothing..! He also checked the trans fluid... the level is find and there are no leaks but it is very burnt. For this reason he thinks we should start by a complete trans flush and fluid change (148.00). Any thoughts? Thanks ![]()
__________________
Brandon 2008 S550 1957 Dodge D100 1967 VW Microbus 21 Window 2001 Suburban 2004 Beach cruiser bicycle -----------------GO DUKE!----------------- "It cannot be emphasized too strongly or too often that this great nation was founded not by religionists, but by Christians; not on religion, but on the Gospel of Jesus Christ. For that reason alone, people of other faiths have been afforded freedom of worship here." Patrick Henry 1776 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Auto -> Manual Transmission Conversion Has Begun. | R Leo | Diesel Discussion | 341 | 08-15-2016 07:21 AM |
97 E320 Is My Transmission Finished? | MarekW | Tech Help | 58 | 06-17-2004 02:52 PM |
Need transmission part # help please!! | mattdave | Diesel Discussion | 0 | 05-01-2004 01:30 AM |
400E diag codes | bourman | Tech Help | 4 | 12-30-2001 03:17 PM |