|
|
|
#1
|
||||
|
||||
It was -10 this morning, and my turn column was a bit stiff. After making a hard left turn, the turn signal column would not return to its off position. I then noticed it would not move up into the right turn position at all, it seems to be locked out of that position. Hi- beam works fine. Any ideas? I have a 1984 380se, Thanks
|
#2
|
|||
|
|||
Remove steering wheel check the cancel ring and switch,mostly is the switch. hope this help.
__________________
MB STARS Master Guild Technician,17 years MB tech 14 years independent shop owner |
#3
|
||||
|
||||
What type of tool do I need to remove the steering wheel? It looks like a large allen wrench might work. Also, is the switch repairable, or should I replace it from the partshop if available, Thanks again
|
#4
|
|||
|
|||
That is 10mm allen to remove the nut,switch is not repairable. hope this help.
__________________
MB STARS Master Guild Technician,17 years MB tech 14 years independent shop owner |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Left Turn Signal Inop | MikeFLA | Tech Help | 4 | 09-04-2005 02:22 PM |
Intermittent turn signal failure (1985 380SL) | Southin | Mercedes-Benz SL Discussion Forum | 6 | 10-13-2003 05:14 PM |
Can't Hear the Turn Signal Click! | bmcglamery | Tech Help | 1 | 09-27-2003 01:08 PM |
turn signal problem after steering box R&R | rvolheim | Tech Help | 3 | 06-07-2003 04:19 PM |