|
|
|
#1
|
|||
|
|||
m104 swap questions
I have a 91' 190e 2.6 that may have a burned out engine....(its being inspected as I type this). I have been considering doing an engine swap for a while now, and so this would seem to be the logical time to do it if my 2.6 engine really is gone. So, i have pretty much settled on an m104 swap
over on the 190rev site 2phast (i think you post here too right?) clued me into looking at the m104.908 (i believe thats the code) from a 90-93' 300SL. The power rating is perfect for my needs but I have some major questions for some of you who might have specific knowledge about these engines and/or this swap 1) I know they are both CIS-E engines, and I'm just wondering what parts from the 2.6 are not compatible with the m104? I heard the ECU will work, and that the fuel system should work too. Anything big that I'm missing that will cause problems?? 2) Transmission to use.....I have thought about the 2.3-16v 5-spd, but there may be others too. I really want a manual, so I'm wondering what problems I might run into there If anyone can help, I would really appreciate it!! Oh yeah, this is also my first post on this forum, so hello everyone! |
#2
|
|||
|
|||
nobody familiar w/ these engines???
|
#3
|
|||
|
|||
I believe the 3.0 liter M104.990 from 1990-1992 300CE's is also a direct swap. It uses the same CIS-E as your 2.6.
__________________
Paul S. 2001 E430, Bourdeaux Red, Oyster interior. 79,200 miles. 1973 280SE 4.5, 170,000 miles. 568 Signal Red, Black MB Tex. "The Red Baron". |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS: M104 swap for 300E/190E COMPLETE! DOHC inline 6 | typejr | Mercedes-Benz Used Parts For Sale & Wanted | 4 | 08-08-2005 03:04 AM |
Engine swap questions 300 to 240 | drpatro | Diesel Discussion | 0 | 06-16-2004 12:51 AM |
Final Questions on Engine Swap | diesel don | Diesel Discussion | 17 | 09-23-2003 11:21 PM |
M104 Head Gasket and 722.6 questions | KyAl1013 | Tech Help | 14 | 06-02-2003 09:53 AM |
fuel-pump questions: screw-drive and rates for AMG M104 | ke6dcj | Mercedes-Benz Performance Paddock | 1 | 08-06-2001 05:54 PM |