Relearn/adaptation procedure after replacing EA?

07-26-2005, 01:46 PM

JimF

'94 S500: only 793 sold!

Join Date: Mar 2001

Location: San Diego, CA

Posts: 1,933

Did you fix your . . .

Quote:

Originally Posted by pmizell

(Electronic Accelerator) on a '94 C280?

Hi folks, I just replaced my EA/CC/ISC unit and need to know if there is a specific sequence that needs to be followed to allow the EA to relearn idle and full throttle positions, or is it simple 'plug and play'? I've seen the procedure for a 120 engine's EA but not sure if that applies to the 104's unit.

Further, I was wondering if I need to reset/reactivate the HFM-SFI control module after this repair. I've seen the procedure in the archives using a pulse counter.

Thanks in advance!

. . ETA?? If so, was it rebuilt or brand new?? Recall you mentioned a company call "bba-reman". Did you use them?? And you also replaced the EA module??

__________________
Regards . . . . JimF
-------------------
'94 S500 Cpe

Visit my Mercedes Web Page

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is On Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
'85 300TDT DIY: Replacing Rear Shocks	Alec	Diesel Discussion	0	11-12-2002 01:23 PM
Replacing Engine &Trans. Mounts Need Help	420benz	Tech Help	13	11-12-2002 11:35 AM
Would like help on replacing rear rotors on E320	fhmajid	Tech Help	3	10-07-2002 09:14 AM
Replacing Front Flex Disk on 300E	ejsharp	Tech Help	13	09-10-2002 08:41 PM
replacing rotors in 400E	400Eman	Tech Help	6	11-02-2001 07:58 AM

All times are GMT -4. The time now is 06:17 PM.