|
|
|
|
|
#1
08-02-2005, 04:06 PM
|
|||
|
|||
|
prepping the block for new head gasket
how should I prep and clean the block for re-assembly? some of the old gasket is stubborn and stuck.
also I read in the repair manual that after removal of the head, there is a oil return tube that something has to be done to. I dont quite understand what the manual is trying to say. other than that, all is well. the head is at the machine shop getting a valve job at the cost of $450. parts are on their way and I am prepping away. 
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Head Gasket and other items on 300SDL | tstarr | Diesel Discussion | 12 | 07-10-2004 11:44 PM |
| Just replace the head gasket or do the lot? | Greg in Oz | Tech Help | 21 | 02-01-2004 11:51 PM |
| 300E Head Gasket Replacement? | Evan | Tech Help | 6 | 11-23-2003 08:19 PM |
| a couple of questions on head removal | MarkM | Diesel Discussion | 14 | 02-13-2002 12:43 PM |
| OM603 head gasket replacement - DIY, yes or no?? | gsxr | Diesel Discussion | 1 | 01-17-2002 08:15 PM |
Threaded Mode
