Help! I am replacing the multi-pin (about 12 pins) main connector from my wiring harness that goes to the back of my instrument cluster. It is the largest connector, round, and brown in color. The problem is that I lost the wiring diagram I had made telling me which pin goes where...the pins just slide in and out of the connector. What I need is either a wiring diagram or a sketch of one with the color-coded wires showing where each goes on the connector assembly. Ugh!!! Caution...they snap apart easily, but the pins come out very quickly, so great care is required if one needs to open it up for repairs. I have found that just a little strain on these when removing the instrument cluster can cause the pins to rotate and cause a short, so never put any strain on the cluster when servicing them!!!
In any event, if anyone out there can help me, or direct me to a diagram I shall be eternally greatfull. Many thanks, Jeff