|
|
|
#1
|
|||
|
|||
My 94 E320 is still in the shop for some warranty work. When it comes out I want to replace my front brake rotors. Does anybody know what's the size of the front brake rotor retaining bolt (looks like it takes an allen wrench per the 124 CD-ROM manual)? I don't have the best equipped shop in my garage and I may have to go out and buy the proper-sized wrench, and if anybody knows the answer you can save me a step or two.
Thanks Bill
__________________
Bill 92 300E (Black/Grey interior: wife's car) 94 E320 Wagon (White/Saddle interior, Eibach springs, '96 E420 16 x 7.5 wheels) |
#2
|
|||
|
|||
You will need a 19mm socket and a long bar to break the bolt loose. You will need to dab some loctite blue on the bolts before reinstallation.
__________________
Benzmac: Donnie Drummonds ASE CERTIFIED MASTER AUTO TECHNICIAN MERCEDES SPECIALIST 11 YRS |
#3
|
|||
|
|||
Donnie, I think you did a "Gotcha". 19mm for the little allen screw that keeps the rotor in place on the spindle...Maybe the caliper retainer bolts. Thought that fellow was a little 5mm hex drive.
__________________
Jeff Lawrence 1989 300e 2000 Dodge Grand Caravan SE No matter what you fix, there will always be something else to fix.. "Warranty" is just another way of postponing the inevitable. |
#4
|
|||
|
|||
The front rotors are held on to the wheel hub with 8mm Allen screws.If they seem to be very tight,apply heat.This will break the Locktite.Use a 19mm socket to remove the caliper(2 bolts).Good luck.
Bill Lewallen Lexington,Ky. |
#5
|
|||
|
|||
Thanks, Gents:
Got the locktite, got the 19mm socket, got the long bar, and got a heat source. Now to get the 8mm allen wrench! Thanks, you've saved me a couple of extra steps. Cheers Bill
__________________
Bill 92 300E (Black/Grey interior: wife's car) 94 E320 Wagon (White/Saddle interior, Eibach springs, '96 E420 16 x 7.5 wheels) |
#6
|
|||
|
|||
Thanks for jumping in Bill. It's been a while since I've pulled rotors on the E car. 8mm sounds like the ticket. BTW, if you are doing this in the driveway or other than on a lift, be sure of your jack stands and block the rear wheels. Be sure-be safe..
__________________
Jeff Lawrence 1989 300e 2000 Dodge Grand Caravan SE No matter what you fix, there will always be something else to fix.. "Warranty" is just another way of postponing the inevitable. |
#7
|
|||
|
|||
Good advice, Jeff, thanks
Bill
__________________
Bill 92 300E (Black/Grey interior: wife's car) 94 E320 Wagon (White/Saddle interior, Eibach springs, '96 E420 16 x 7.5 wheels) |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
front brake diagnosis help please | djugurba | Diesel Discussion | 2 | 11-18-2004 11:42 PM |
Front Brake Caliper Bolts | git0 | Tech Help | 18 | 01-12-2004 09:29 AM |
Vibration and now locked up front brake W126 | BMJR | Tech Help | 6 | 08-10-2003 03:51 PM |
changing 230E to 320E front brake calipers? | netken | Tech Help | 1 | 10-15-2002 10:49 AM |
ML320 front brake pads | herbert | ML, GL, G-Wagen, R-Class, Unimog, Sprinter | 6 | 01-08-2001 10:42 PM |