Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 11-19-2005, 08:37 PM
Registered User
 
Join Date: Jun 2002
Posts: 45
Removing Front Crank Bolt m103

Is putting the car in gear and emergency break on the same as locking the flywheel when removing the front crankshaft bolt(300Nm)? Will I damage anything in the drivetrain? Replacing the front crank seal.

Reply With Quote
  #2  
Old 11-19-2005, 10:09 PM
engatwork's Avatar
busy
 
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 12,572
Quote:
same as locking the flywheel when removing the front crankshaft bolt
nope

If you do not have the "holding" tool then try to wedge a long pry bar against the teeth of the flywheel while you break the crank bolt loose. You will probably have to use a pipe cheater on the breaker bar to start it turning. When tightening it up I borry the 0-600Nm torque wrench from work which makes achieving 300Nm alot easier.

__________________
Jim
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 05:43 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page