Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 12-08-2005, 03:34 PM
Registered User
 
Join Date: Apr 2002
Location: westchester, ny
Posts: 747
Rear power window question w124

The passenger rear is stuck in the up position on my 87 300e. All switches and fuses are good. I removed the door panel and inspected. Saw a red wire spliced into the wiring from the regulator/motor asssembly. The wire comes into the door through the short black rubber piece at the door jamb and is spliced into the assembly wiring about 8 inches below the door switch. I am reluctant to unravel the electrical tape if this is an oem wire. Is this oem or something the PO did to tap into the power? It would be helpful if someone has a photo of how this is supposed to look. Thanks.
__________________
87 300e (white/black; amg body kit)
88 300ce (red/cream; amg body kit)
93 300ce cabrio (white/blue/blue top)
93 300ce cabrio (black/grey/black top)
98 ml 320 (totaled @ 137,000 miles)
99 clk320 (black/grey/black top)
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 11:04 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page