|
|
|
#1
|
||||
|
||||
Part # Windshield Washer Reservoir Cap 1988 420 SEL
Does anyone have the correct part number for a windshield washer reservoir cap for a 1988 420 SEL?
TIA
__________________
I'm wanted in four states, but it's all good. Got me a new driver's license and a sweet new pickup. V-8, Baby, five-hundred horsepower. Oh, and four of them mudflaps with the naked ladies on them. GRRRRRRRR, MAMASITA!!! And the best part is, it's all free!!! Yeah, well, for me at least!!!! HA-HA-HA-HA-HA!!!! |
#2
|
|||
|
|||
Quote:
|
#3
|
||||
|
||||
Quote:
__________________
I'm wanted in four states, but it's all good. Got me a new driver's license and a sweet new pickup. V-8, Baby, five-hundred horsepower. Oh, and four of them mudflaps with the naked ladies on them. GRRRRRRRR, MAMASITA!!! And the best part is, it's all free!!! Yeah, well, for me at least!!!! HA-HA-HA-HA-HA!!!! |
#4
|
|||
|
|||
Quote:
|
#5
|
||||
|
||||
Quote:
My washer reservoir cap could not be secured to the reservoir (this was a recent development). The reservoir has a threaded-looking neck, so I assumed that the cap was warped or cracked. The part number you quoted -- which is the same part number that my local M-B dealership gave me -- has no means of attachment on my car's washer reservoir or any other 126 chassis washer reservoir. I convinced the dealership to order a cap with the same part number as the currently installed reservoir cap -- 123-869-01-72. Fitment was the same: it could not be tightened securely. After doing some detective work, I found out that in order for the cap to attach to the reservoir, a seal is required; part number 123-997-05-40. That item was missing from my car and was the source of my frustration.
__________________
I'm wanted in four states, but it's all good. Got me a new driver's license and a sweet new pickup. V-8, Baby, five-hundred horsepower. Oh, and four of them mudflaps with the naked ladies on them. GRRRRRRRR, MAMASITA!!! And the best part is, it's all free!!! Yeah, well, for me at least!!!! HA-HA-HA-HA-HA!!!! |
#6
|
||||
|
||||
Mine's too small!
I have an '85 300TD wagon. The majority of the washer system was missing from the car when I bought it. I ordered everything from MBParts.com, the numbers on the reservoir and cap match, the cap seems to be the same cap/same-sized cap as the one on the rear reservoir, but it's way too small. Cap # 123 869 01 72 I forget the reservoir #, but I think it's also a 123 869#. My best guess is, the front reservoir takes a bigger cap. Or, I've go the wrong reservoir. It doesn't look wrong, though. Any ideas?
__________________
Oro en Paz, Fierro en Guerra. |
Bookmarks |
|
|