Lowered my 300E. Long.

[Steve190E 2.3]

I lowered my 300e tonight. I used B+G springs, http://www.bg-suspension.nl/ from http://www.tunerworks.com/ and install was a cinch. I used them upon advice of a friend that knows high performance and spends a lot of time at the track . He said they are as good if not better than H&R's, Eibach's etc. I was hesitant as I had Eibach's on my 190 but took his advice. I left the stock spring pads. 2 Front and 3 Back. The quality looked top notch and the ride seems to be great. The only problem I am having is that the back doesn't look as low as the front. I know that the spring pads are thicker in the back, but shouldn't it lower almost equally? Does the difference between 2 and 3 (5mm) make that much difference? I was wondering before I swap out the pads at the back to 1. I still want to be able to align the car to spec. Thanks.

[Edited by Steve190E 2.3 on 02-23-2001 at 05:32 PM]