|
|
|
|
|
#1
02-10-2006, 08:08 AM
|
|||
|
|||
|
W124 (260E) Cold Start
My benz is hard to start when cold. It runs great after starting. I know where and how to replace the fuel pressure regulator but what and where is the "cold start valve" She is a 1988 260E. Any help will be greatly appreciated.
|
|
#2
02-10-2006, 08:23 AM
|
|||
|
|||
|
Is your anti-lock brake light on lately?
__________________
-Marty 1986 300E 220,000 miles+ transmission impossible (Now waiting under a bridge in order to become one) Reading your M103 duty cycle: http://www.peachparts.com/shopforum/831799-post13.html http://www.peachparts.com/shopforum/831807-post14.html
|
|
#4
02-11-2006, 12:59 PM
|
|||
|
|||
|
no cold start valve
It's not the cold start valve. It sounds like the OVP or the computer. Your car needs alot of air and fuel at start up and if the car starts right off the bat and stalls and then you have to keep starting it and stalling until it takes off, its going to be the cpu for the fuel system (ECM) and/or the OVP.
|
|
#5
02-11-2006, 05:08 PM
|
|||
|
|||
|
Quote:
 OVP -Behind the battery, behind the black plastic water shield, looks like this: http://catalog.eautopartscatalog.com/mercedesshop/sophio/wizard.jsp?partner=mercedesshop&clientid=catalog.mercedesshop&baseurl=http://catalog.peachparts.com/&cookieid=1OH0MY2181QC10NDIR&year=1988&make=MB&model=260-E-001&category=P&part=Overload+Relay
__________________
-Marty 1986 300E 220,000 miles+ transmission impossible (Now waiting under a bridge in order to become one) Reading your M103 duty cycle: http://www.peachparts.com/shopforum/831799-post13.html http://www.peachparts.com/shopforum/831807-post14.html
|
 |
| Bookmarks |
|
|
Linear Mode
