Code 3 in SRS System

03-06-2001, 06:40 PM

mbdoc

Moderator

Join Date: Mar 1999

Location: Tucker, Ga USA

Posts: 12,153

Code 3 means the return voltage thru the air bag & wiring was incorrect. Computer sends voltage signal to air bag & expects a return voltage back. Your car isn't sending the correct return voltage back. Too high(low) resistance in wiring, contacts, or air bag.

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator

Bookmarks

« Previous Thread | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is On Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fault Code 9 – EHA Current illogical	Tony Smith	Tech Help	25	11-19-2012 08:43 AM
DM DTC Code 4 Question	104.992	Tech Help	20	01-26-2005 09:33 PM
Comand System	albert champion	Tech Help	10	02-17-2004 12:37 AM
Strange cooling system problem - exhaust gas entering system??	gsxr	Tech Help	52	01-13-2002 12:10 PM
SRS Light Constant ON!	David C Klasse	Tech Help	7	01-01-2002 06:39 PM

All times are GMT -4. The time now is 08:05 AM.