![]() |
|
|
|
#1
|
|||
|
|||
Just got my car back from the mechanic and he says my problem is the vacuum going to the distributor. I'm not getting any fast idle on start up and I have to keep my foot on the gas until the car warms up enough.
Any ideas on what to check other than the lines. I had the black box that controls the three vacuum check valves (or whatever they are called) on the passenger side wall (near the carb) repaired, but I suspect these aren't functioning properly. Are they replaceable ? I don't see them listed in any parts store. Thanks, AARON ROCHARD 1976 230.4 W115 |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
240D shakey at idle, fast idle, how to adjust?? | unkl300d | Diesel Discussion | 4 | 10-19-2003 08:39 PM |
E320 Rough Idle / Egr Problem | earossi | Tech Help | 13 | 09-22-2003 09:14 AM |
fast idle horror | 84euro500 | Tech Help | 1 | 05-04-2003 09:21 PM |
560SEL hard start /low rough idle | algae1 | Tech Help | 0 | 05-30-2002 09:49 AM |
400E rough idle problem finally solved | carman850 | Tech Help | 1 | 04-19-2002 07:38 PM |